mystikaldrizzle

Thank you so much for the information!!!

Hello,  I will be using a CR800D

Hello all,  I'm tasked with integrating 4 Mitsubishi brand SCARA robots to an iQ-R controller. Would the best method be SLMP communication protocols?  Or if someone has done something similar in the past, what did you do?

I will give this a try later on today and provide feedback! Thanks so much for the response!

  Let me give this a try! Good Afternoon! DataMan cameras can not be configured in In-Sight and vice versa.  In-Sight Explorer wouldn't be able to find a data man camera either.

Good Afternoon! DataMan cameras can not be configured in In-Sight and vice versa.  In-Sight Explorer wouldn't be able to find a data man camera either.

 

Will do!

Since I'm attempting to use SLMP protocols I am not able to arm the trigger.

Single External

Good morning,  I gave it a try with no success unfortunately. I appreciate you giving me your suggestion!

Update:  I've made a support request with Cognex. Hopefully, they may be able to offer some insight.  I appreciate the help and responses! I will update once this issue is resolved, just in case anyone else runs into this issue!

I attempted to Utilize all the options in the Destination drop-down box. I also brought my Data Registers to D100, D102, and D104 respectively. I get the same feedback that the configurations are correct from colleagues but the problem persists. I'm going to keep playing with this and if I can make this work I'll explain what/where I went wrong. 

Here are the options in the drop box.  I will attempt to reassign the Data registers and see if that helps! Thanks for the response!