jjjaayyy

here os my sample program thanks again sample.zip

thank you for all the help i have wrote a sample program for just the analog card would you have a little look and give me your expert addive many thanks jay

ooops i am so stupid my analog card is in slot 2 . i forgot about first slot being 0 so slot 0 is 16 input card slot 1 is 16output card slot 2 is my 3 channal analog card so that makes my programming wrong should be x20 x21 h2 and so on but is the program ok besides the wrong address? thanks so so much for your help . lives a learing curve and i am at the bottom!!!

the I/O layout is slot 1 is 16inputs. slot 2 is 16outputs then my analog card with 2 analogs in and 1 analog out but i am not using the out on the analog card just started to get to grips with a E600 screen i realy do love the flexibilty to them. trying really hard to understand the mitsui manuals i think they are written in double dutch (not easy to follow)

thank you for your reply! do you think this is right ? | m9036 |--| |---|/|---| |-----------------[top h3 k1 k0 k1]-------| | x30 x31 | | | |-----[top H3 k20 k2 k1]------| | | | | |-----[from H3 K10 d10 k1]---| | | | | |-----[from H3 k11 d11 k1]---|

Never programmed Analog card before need help . i am using a1s cpu with input card in slot 0, output card slot 1, analog card a1s63ada slot 2 , rs232 card slot 3 on the analog card i am trying to use input 1 and 2 but i am not using the output analog of this card both inputs are a 4-20mA signal. i have look around for example programs but struggled to adapt to my requirements could any one help