Chloe

thanks for the input, however, I've done it already for the Q series and it works fine, but not with the R16 CPU.

hello, anyone here have experience working wireless communication to CPU using NAT.. i have connection issue from my pc to R16 CPU using NAT. while i keep working online, suddenly connection would cut off and i could no longer re-connect to it. i was assuming it be compatibility issue, but cannot confirm it cause there is no feedback yet from both vendors....

Hello Versiondog Auvesy vs. MDT Autosave?? I need some inputs.. Cost, reliability etc.. i was task to decide which to purchase. Thanks

Thanks all for the advice. 

Hello looking for Visi0n terminal users manual for ""XG-7ooo"". cant DL it from site unless provided with product S/N.  Thanks

Need help!! I having trouble connecting through public/private (wireless) on my NAT device remotely, seems that not all laptop can connect through wireless, cuz, i can successfully connect using my colleagues devices( few others cannot as well). is there any particular setting required for a my hardware? IT already have done many things, like updating my Firmware, updates, etc. thanks    

yes i can access NAT network via local.

sorry, I misunderstood.  Wired connection via the network--> ping not OK Wired connection via local(direct to NAT)--> ping is OK

i can only ping it via wired. 

The NATR im trying to access is wired directly to the company's Network. And my device(my PC) is connected to that network via WI-FI. I want my PC to connect to that NATR through that Network via WI-FI. or am I doing it wrong. this is new assignment to me btw. thanks for the reply.

Hello Im trying to read from my PLC but i cannot see the program file.  However, if i try to compare it using other file program, i could see the program file. Is their any restriction in my software?

Q03UDECPU

Yes Im using licensed version. I forgot to mention, during READ, I can only see the 'Parameter's and 'Device Comment' but no 'Program file'.

Can anyone recommend Version control software for storage and history tracking? I'm working with Mitsubishi PLC and OMRON. thanks.

Thank you, Panic Mode, Its still a program scan issue, It's suppose to be place on the MAIN tree, rather I put it on the BRACH tree, where at certain case not scanned if product model does not match. thanks alot.

Ron_S It is just a simply latching method, my input is coming from HMI, I already double checked its setting. i tried forcing on that switch but the coil still did not work.

Hello I have the same issue, but my "Scan Program" seems fine. I tried to Rebuild all program and downloaded, still didn't work. it will only turn on will I Forced it on. thanks

hello Crossbow Thank you for the comment, I will try to upload it.

HELLO I'm new to Q series, my objective was very simple, I only need to replace Q04 with Q13 model because I have memory issue. I uploaded the same program to Q13 but some Inputs were not responding. What did I miss? I only change the PLC module type on GX work and uploaded it to the CPU. Thank you!

Hello Gambit I mean Input from an intelligent device.