CalyptoGraphite
MrPLC Member-
Content count
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by CalyptoGraphite
-
Have 2 VMs, 1 FTView and 1 Studio and emulator and need them to talk to eachother
CalyptoGraphite posted a topic in Allen Bradley / Rockwell Automation
I have 2 vm’s, 1 with FactoryTalk and 1 with Studio 5000 and Studio 5000 emulate and I need the Factorytalk to communicate with the emulated plc on another vm and wondered if this is possible.-
- factorytalk
- emulator
-
(and 1 more)
Tagged with:
-
VM With Studio 5000, FTVSE, Emulate 5000
CalyptoGraphite replied to CalyptoGraphite's topic in Allen Bradley / Rockwell Automation
and we disable UAC and disable the ENABLE_LUA in the registry -
VM With Studio 5000, FTVSE, Emulate 5000
CalyptoGraphite posted a topic in Allen Bradley / Rockwell Automation
Ok, so I was tasked with setting up a virtual for our development team to be able to use to quickly deploy projects hmi, emulated plc, and studio 5000 project together on one virtual. The main reason for this is when we get a project, many times we have to wait for an available plc. We have plc’s in our rack but they can’t be used because they are being used for other projects. I’ve used the compatibility matrix that Rockwell has but my boss wants to stick with Windows 10 Professional like we do in most our projects but according to the matrix, it looks like having FactoryTalk View SE Enterprise version 10, Studio 5000 Logix version 33 and Studio 5000 Logix Emulate version 33, FactoryTalk Gateway 6.11 and RSLinx 4.11 (mainly for communication to the emulated plc) but in the matrix says Windows 7 and Windows Server 2012 is the best choice. I’ve ran into issues with Emulate opening, it takes up to 20 minutes to open. Our licenses are on a server and accessed using FactoryTalk Activation Manager and all the activations are there. Any suggestions would be appreciated.- 5 replies
-
- studio 5000
- factorytalk
-
(and 1 more)
Tagged with:
-
VM With Studio 5000, FTVSE, Emulate 5000
CalyptoGraphite replied to CalyptoGraphite's topic in Allen Bradley / Rockwell Automation
Thanks for the reply, ya we just disable the firewall since we're always behind the sites firewall -
VM With Studio 5000, FTVSE, Emulate 5000
CalyptoGraphite replied to CalyptoGraphite's topic in Allen Bradley / Rockwell Automation
Well, this morning I decided to borrow the activations I needed to my virtual and then I started Emulate and I timed it and it took 5 seconds to load, before it would take almost 20 minutes and FactoryTalk View Studio took 5 seconds to open and before took around a minute and Studio 5000 took 15 seconds to open and before took about 30 seconds to open. So I think that Rockwell Software has an issue with remote activations.