wildan035

MrPLC Member
 View profile  See their activity

  • Content count

    9

  • Joined

  • Last visited

Community Reputation

0 Neutral

About wildan035

  • Rank
    Newbie

Profile Information

  • Country Indonesia
  1. ok sir, I will try this method.
  2. The link indicator light shows that the PLC and ECAT module are connected. next time I will try to contact the ICP DAS company to ask about this problem. thank you for your help, next time I will update the progress of this problem.  
  3. on the ecat 2610 module the red LED or "RUN" LED lights up Single Flash The device is in the SAFE-OPERATIONAL state, the error indicator on the ecat 2610 module does not light up indicating there is no error in the module section. on the ecat 2080 module the red LED or "RUN" LED lights up ON the device is in the OPERATIONAL state.
  4. what i mean is i set the nodes is sysmac studio to be 2610 as 1 and 2028 as 2.  yes, I connected the device as I set in sysmac studio. i don't use the Ethercat hub, the network just run from the controller to the first device, and then loops to the second device. in the order the devices are physically connected like this, PLC to 2610 to 2810. great, you have used 20 devices at once, that means you have experienced an error just like me? and how do you solve it?
  5. i write slave node address to module and fill it in ethercat window and then i transfer to devices.
  6. module does not use a switch to set the node number. I set the node number on sysmac with the order icpdas ecat 2610 number 1  and icpdas ecat 2028 number 2.
  7. connect 2 slave. slave 1 ICP DAS ECAT 2028 and slave 2 ICP DAS ECAT 2610. IPC DAS ECAT 2028 module can connect and run normally. but in the ICP DAS Ecat 2610 module I got the problem.link description for module slave:https://www.icpdas.com/en/download/index.php?model=ECAT-2610http://www.icpdas.com/en/product/ECAT-2028
  8. connect 2 slave. slave 1 ICP DAS ECAT 2028 and slave 2 ICP DAS ECAT 2610. IPC DAS ECAT 2028 module can connect and run normally. but in the ICP DAS Ecat 2610 module I got the problem. link description for module slave: https://www.icpdas.com/en/download/index.php?model=ECAT-2610 http://www.icpdas.com/en/product/ECAT-2028
  9. Hello, I have a problem when communicating between PLC NX102 and ethercat slave module. ethercat slave still Safe-Operation state. and i get error  • Slave State Transition Failed • Slave AL Status Error Detected does anyone know how to deal with it?