Dingo951

Hi gentlemen, I have I bottle capping machine and I'm reading the torque value from one of the Sureservo2 drives. As the bottles pass through the machine, I need to display the peak torque value and hold it until the next bottle passes through. This machine could run up to 100 bottles a minute. I would also like to display a 10 bottle peak torque average. Does anyone know of a good way to do this? Any help would be appreciated.  

Dang, it wont let me upload anything. I will try what you suggested this morning, it  makes more sense now knowing the module power is internal.

I'm trying to control the speed of a drive through a 1762-IF20F2 output and the manual has very little information on how to wire this set up. I'm not sure if the module has its own power supply but I imagine I have to use the drives power supply.   Any help is greatly appreciated.

I'm using voltage, the drive is an old Seco Mentor ii dc drive.