Rodrigo Balsalobre

MrPLC Member
  • Content count

  • Joined

  • Last visited

Everything posted by Rodrigo Balsalobre


    Hi! I was doing an project using function block, but at one point it became too complex to use FBD so I would like to use ladder.  I'm using an ihm and that's why some inputs are of the network type, in FBD, it's easy to use the network i/o, but in ladder, the network inputs, where I receive data from the ihm, don't have outputs for me carry out the logic. How can i do this? USING FBD USING LADDER As you can see, theres no output on network analog input, on the digital to!

    just fixed the problem that i said before, but its using the other method that i tought, It will be nice if uses the hmi as a master like the first method with that error
  3.  Hello!   I was trying to communicate my siemens logo with an kinco hmi but this error are appearing on the hmi, what am I doing wrong? Im using an ethernet hub! ETHERNET SETTING ON THE HMI THE PUSH BUTTON THAT ACTIVATES M1 THE LAMP THAT'S REPRESENT "Q4" AND THAT I DON'T KNOW HOW ITS WORKS BUT I JUST PUT ON THE SCREEN TO THE PROGRAM ON LOGO SOFTCOMFORT I JUST SET THE LOGO AS SLAVE WITH THE HMI IP THE LOGO IP AND THE ERROR MESSAGE

    I can to this communication using the hmi as a slave, but with that, its more hard to do what I want, like on the video that I sent, the hmi uses the i/o from plc, using the plc as a master its like that:  The ethernet connection on hmi software The type of adress and his number: How you need to write on plc:     And theres an error with this program, for some reason he stopped to work like yesterday, but I will fix it   Btw, on this method, it's like i said, it will be more hard to do what i need after this simple logic  As you can see, theres no error with this method

    I think it's already  allowed, can you help me with that? And about the program, I just make it equal like this video: The guy who made this video takes a while to do it correctly because he make a mistake, but the final result is equals than mine

    Wow, the lamp isn't appearing on the hmi for some reason
  7. Hello!   I have a humidity sensor 0-10v and his measurepoints is for 10 to 90 humidity %. Using the Analog Amplifier, I set his measure range but theres a problem... he's only givin me integers numbers, and I need the decimal one's to. On the Analog Amplifier, with that range the program says that the gain on the measure is 0.08 for each number on the analog input, theres a way to see that decimal places? I tried increasing the measure range to 100-900 and set the decimal case to 1 but the gain turns to 0.8, with that I just can take jump number like 10.8->11.6->12.4. How can i do this on the way that I need? It's an LOGO 8! After setting measurement range from 100 to 900:
  8. LOGO!SoftComfort | Another help with analog instructions

    sorry for the grammar errors, I didn't realize ! :-/
  9. LOGO!SoftComfort - Help with Analog Instructions

    Thats a simple solution, I've watched a video and when the guy put the function block, theres inputs and outputs, but this way works to, ty !
  10. LOGO!SoftComfort - Help with Analog Instructions

     Hello! I was trying to configure an Temperature Sensor using the Analog Threshold Trigger to parameters and output activation but, when I put this function on the program, there's just input point, on the output there's no way to link to an DO, when I select the other one's analog function's to see, they all have the same problem. How can I fix this?
  11. LOGO!SoftComfort - Help with Analog Instructions

    it's an logo 8, with 8 analog and a 8di/8do expansion module. I have to declare tha expansion module on the software? If yes, do you know how can I do that?
  12. Hello!  I was trying to set an value on "d" register to use him like a parameter. We are talking of connections of m0 on the next image:   the system works as follows: when pressing a button (M0), it moves the variables typed in the HMI (D14 and D16) to D10 and D12, at the same time that it takes these values and generates the parameter of minimum (D8) and maximum (D60). And its works perfectly, at least while on. When the clp is turned off and on, the variables are reset to zero, even if the only way to change the values is to press the set button again. What can I do to make it keep the information that has been moved?
  13. FX3U reseting all D register when start up! How can I do to make him memorize?

    Thank you for the help! Can you tell me the difference between latched and fixed latched?
  14. Hello ! I'm programming an LE3U plc, similar to FX3U plc from mitsubishi. They both use the same software to program, GX Works2. I'm trying to put the value from a pressure sensor on a scale using SCL, but as you can see the value from the port aren't converting on my scale table. What i'm doing wrong? The clp identificate as 770(4mA) 3860(20mA) and I'm trying to convert that into 0(4mA) 250(20mA). On the next image, you can see that i'm sending 20mA on this AI, and D0 reaches the maximum, and that is right, but isn't doing the scale..
  15. [SOLVED WITHOUT SCL FUNCTION] What i'm doing wrong with SCLP in GXWorks2

    SOLVED ! For some reason, the SCL function just can't work for me, searching for this, I found your equation in another post, the UNIVERSAL EQUATION FOR SCALLING, "out = (in-in_low)*(out_hi-out_lo)/(in_hi-in_low) + out_low". Thank you for the help!
  16. [SOLVED WITHOUT SCL FUNCTION] What i'm doing wrong with SCLP in GXWorks2

    If you can't help me with SCL anymore, could you please give me another solution for that I want?
  17. [SOLVED WITHOUT SCL FUNCTION] What i'm doing wrong with SCLP in GXWorks2

    Ty for the reply!  As you can see, the number of points is represented by the first line of the table I tried your method, putting the SCL as the final line, using and not using the first line as the number of point but still dsn't working. USING SLC AS THE FIRST LINE   USING THE SCL AS THE LAST LINE LINE here is when I use your method with the first line as the number of points. I tried without this first line and 5 points like you did, but stil dsn't work