hamadi

MrPLC Member
  • Content count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral

About hamadi

  • Rank
    Sparky

Profile Information

  • Country Canada
  1. Hi I want to order a static relay to regulate the temperature by PID (PWM) How can I do it by studio5000? I can't find a ready command that gives pulses to control static relay according to the temperature. Thank you
  2. Hello I have a program that was made by factorytalk view V5 with extension .mer I couldn't open it with version 6. Is there a solution? is there anyone who can convert it to me in apa or .med Thank you ROPEC_l30_16122021.mer
  3. I HAVE A tags type DATE-AND-TIME  and I want to initialize it to 0 how i can do it on sysmac studio Thank you
  4. Hello how to configure and read data from a zebra LS2208 barcode reader with an OMRON NB-HMI (nb designer) using the USB port thanks
  5. barcode nb designer

    Hello who has an example or ideas that can help me in my research to read a bar code through an omron NBW10 HMI (usb or serial port) Thank you
  6. hello i have 1S SERVO omron and PLC NX1P2 I want to wire the servo limit switches (POT NOT) to the PLC and send these values to the servo via ETHERCAT Can i do it if yes how
  7. Hi  I want to use in sysmac the number of the active page in nb designer. for example if I am in page number 5, the program in sysmac recovers in a variable the value 5 THANKS
  8. CHANGE position MR-J3

    hi I want to change a position of a servo (MR-J3-350T) which displays as current value 9500 to zero. how I can do it with MR-Configurator. in which menu should I go? thanks
  9. reset position MR-J3

    hi I want to change a position of a servo (MR-J3-350T) which displays as current value 9500 to zero. how I can do it with MR-Configurator. in which menu should I go? thanks
  10. home postion servo J3

    Hi, I have a Mitsubishi Servo motor with its amplifier MR-J3-350T. I lose the home position. How can I set the value of the position to zero if I detect a home detector. I use gx developer. thank you
  11. hello   I want to control my servomotor in manual mode from an ethercat network. Where I can find the JOG FWD and REV information in the frames exchanged between R88d-1S servo and sysmac studio
  12. nb designer PDF

    hello   how i can open a pdf file with a nb designer button Thanks
  13. Hello, can we do the simulation between sysmac and nb designer thanks
  14. macro nb designer

    Hello I want to change the color of a button with a macro code (NB DESIGNER). You have the syntax thanks