Akhmad Zaki

MrPLC Member
  • Content count

    6
  • Joined

  • Last visited

Everything posted by Akhmad Zaki

  1. Mitsubishi PLC with Fernhill SCADA

    Hi, Has anyone here has experience of using Fernhill SCADA with Mitsubishi PLC FX3U Series? I want to monitor PLC's data in real time through FX3U-ENET-ADP ethernet adapter using Fernhill SCADA software. Thanks in advance for the answer.
  2. I have a Siemens HMI 6AV2 124-0MC01-0AX0 in my machine. I want to clone the display on the HMI to PC/Laptop. My question is: 1. What software that I need for this task? 2. What kind of interface that I need between the HMI and PC/Laptop (for example ethernet cable, etc)? 3. Do I need to communicate with PLC connected with HMI or can I just connect with the HMI? Thanks in advance for the answer.
  3. Error Indicator on FX3U-ENET-ADP

    Hi all, I have finished installing ethernet adapter module FX3U-ENET-ADP on the FX3U-48M PLC. From the ethernet module, i connected it to a wireless router and then i am planning of connecting to the ethernet module using GXWorks 2 on my laptop through wireless router. On the ethernet module, the error indicator LED is on (red). From the FX3U-ENET-ADP, it means that there might be setting or hardware errors.  I am asking if i have missed some steps on the installation process and if any of you have experience with similar problems. Thanks in advance for the answers.
  4. Hi all,  I want to ask some questions regarding Ethernet Communication with FX3U PLC series. I have 2 PLCs of FX3U series (FX3U-48M and FX3U-64M) and I want to monitor its data (input and output) using ethernet communication in real time. My questions are: 1. Does FX3U PLC have ethernet port so I can connect it directly to my Laptop/PC? 2. If no, do I need to use FX3U-ENET-ADP and can it be used for 2 PLC or only 1? 3. What software do I need to use to configure the communication between PLC and FX3U-ENET-ADP? 4. Does this configuration change the existing PLC program? 5. Can i transmit the data wireless-ly using some kind of ethernet to wifi adapter and what additional hardware do i need for that?  
  5. FX3U PLC Monitoring with Ethernet Setup

    @Gambit Do you have reference about how to configure FX3U-ENET-ADP with GX Works 2 and how to show and monitor the input/output data?
  6. FX3U PLC Monitoring with Ethernet Setup

    @Gambit Some additional questions: 1. To monitor the input/output data in real time, can I use GX Works 2? Or do I need some kind of SCADA software? 2. Do you have some suggestions for free SCADA software that I can use for that manner, especially if i want to monitor the data via mobile phone? 3. To transmit the data wirelessly using wireless router, do I need to use Hub (FX3U-ENET-ADP -> Hub -> Wireless Router) or it can go directly to the router (FX3U-ENET-ADP ->  Wireless Router)? Thanks for the answer in advance.