robbd86
MrPLC Member-
Content count
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by robbd86
-
Hi all Currently having a communication issue between ns runtime and CP2E. I can ping both the PLC and computer the ns runtime will be installed on and i can ping the PLC from the computer with ns runtime. However when i load up ns runtime i get the timeout error. I believe it must be a setting on my part as i get the same issue when i try to run the simulator. See below for my set up. Hopefully it is something small i have missed. I also tried to use Fins with the same outcome. Appreciate any help on this.
-
Happy new year chaps. sorry for the delay in coming back to you. I will try this today. Cheers
-
Hi all, I am looking for some help. I am in the process of creating a waste program on a CP2E PLC. I have an ns hmi screen to go with it. could anyone recommend a way to add two values together and retain it. For example: First cart of waste of the day is measured and a move instruction is set up to move the measured value from D1 to D15. Then the second cart is measured and i want to add the two together. D1+D15. This is probably simple and i am missing something obvious but i cannot seem to find a way. I also want to record the values for a month so basically just add it up then reset. Is there a way to export this to excel or something similar? All help and ideas greatly appreciated.
-
Hi Chelton No i have just checked think its my fault will try to re-add them. I have attached this time instead
-
Thank you for this it worked perfect.
-
Thank you for the tip. I will have a look into this.
-
We do but they like to lock everything down to their own equipment and don't allow us to play with it. I wanted to be in control of this and have made a nice little program that changes shift and separates the machines etc so i would be pained to use them at this point. Any recommendations for a (cheapish) scada software?
-
Thank you so much for this. Makes perfect sense. I will put this into action and let you know how i get on. Appreciate the help
-
Good Morning all I Regularly use the site for help topics etc. However i cannot seem to find one for this topic. I currently have a set up where i can get online to my CJM1 via factory network to a moxa box then a CS1W-CN226 TO THE plc. This all works correctly and i can monitor the machine from my office. What i would like to do is implement a diagnostic HMI screen, i have created the programme and it all works etc. However would it be possible to use the same moxa and lead as a serial port connection in the same way. So ethernet to the HMI from the moxa and then use the CS1W-CN226 from the moxa to the PLC. basically the same way i get online now. I do not know if its even possible but any thoughts greatly appreciated.