I have read that error table. But I am little lost... How can i set the destination address on the routing table?
I am in that point now.
HMI NS5 config:
IP: 192.168.81.11
Network address: 1 (I cant put 0)
Node Address: 11
PLC CP1L config:
IP: 192.168.81.10
Network address: 0
Node Address: 10
On HMI I can't set Network address as 0, min value is 1.
I am having problems changing the network address from 1 to 0 on PLC because If I change it cant connect to PLC