EATON Cutler-hammer Incom protocol forImpacc systems for HMI/SCADA 1.0.0

1 Screenshot

About This File

The Eaton cutler Hammer Incomprotocol for Impass systems driver from Parijat (ParImpacc), supports communication through serial or Ethernet ports to Eaton Cutler-Hammer devices using Incom or Impacc protocols, as a Master format. The driver enables users to capitalize on the low cost of communications equipment for use as the backbone for a power monitoring system and power quality analysis. ParImpacc can communicate with any serial via MINT or Ethernet viaEMINT device (Master Industrial Communications Network Translator), equipment as breakers, digital meters or motor overload relays. It supports communication with MPCV, IQ 200 & other Eaton devices. The IMPACC protocol module is designed to communicate with devices that use the ASCII version of the INCOM protocol to communicate with a host. 


Features :

Host-to-RTU commands supported:

  • 2024 -300  Get Fast Status
  • 2025 - 305 Get Current Buffer
  • 2026 - 308 Get Power Buffer 1
  • 2027 - 309 Get Power Buffer 2
  • 2028 - 30F (00003B) Get phasingVoltage
  • 2029 3A4 Get INCOM Statistics
  • 2030 3C8 Get Flags Buffer
  • 2031 3C9 Get Setpoints

This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here

For More Info

Overview of Parijat Drivers: Click here 

Additional supporting Info about Parijat Drivers:Click here

Complete Related Driver options: Click here