Other PLC Demo Software

Sign in to follow this  
Followers 0

30 files

  1. Haiwell PLC programming software- HaiwellHappy

    HaiwellHappy Programming Software Features
    HaiwellHappy is the programming software for Haiwell PLC. It accordance with IEC 61131-3 standard, supports  built-in simulator and three kinds of programming languages (LD-Ladder Diagram, FBD-Function Block Diagram and IL-Instruction List). It can run on the systems of Windows 98, Windows 200X, Windows XP and the later Windows versions.
     
    **  You can get the latest version from Download center for free **  
     
    HaiwellHappy Features
     
     
    l Haiwell Cloud Programming
    Support Haiwell Cloud platform, can use Haiwell cloud to do remote programming for Haiwell PLC as upload/download, firmware upgrading, self-diagnosis, monitoring and debugging. Easy for remote connection and real-time data monitoring of the site. Also you can do local programming through a HMI which supports built-in cloud engine.
    l Built-in PLC simulator
    Haiwell PLC programming software supports internal simulator, realizing the PLC program run in the simulation. During programming or the programming is completed, you can run PLC program in the simulation without online to check the program execution is correct or not. It can reduce on-site commissioning time greatly, reduce debugging difficult and improve debugging efficiency.
    l Communication simulator
    It is used to the debug communication instruction simulation tools. It can be manually input simulately response message returned from salve, or you can use the computer's serial port to communicate with salve really, Simulate the process that PLC executes communication instruction really and process the return data from the salve. 
    l Interpolation simulator
    Track and draw the trajectory generated from motion control instructions such as the linear interpolation, circular interpolation, listing parameters of the pulse output channel of the motive plane and corresponding to each axis, display the current position of the channel, the mechanical home position, output mode, you can set shaft length, unit pulses.
    l PLC executable file Generation
    PLC program can be generated to executable file which is released and executed independently. So you do not need to send the PLC program to the user, it can be very easy, very safe to put the PLC excutable file to the user to download, but do not worry the user would can see the program content.
    l Innovative convenient instruction sets
    On the basis of analysis and absorption of various PLC instruction, Haiwell PLC launched many powerful innovations facilitate instruction. As communication instruction (COMM, MODR, MODW, HWRD, HWWR), data portfolio diversification instruction (BUNB, BUNW, WUNW, BDIB, WDIB, WDIW), PID control (PID), valve control (VC), upper and lower alarm (HAL, LAL), range transmitter (SC), temperature curve (TTC) etc. Any one instruction can realize the function but other PLC required to multiple instructions. These instructions are very easy to understand and use, greatly improve the programming efficiency and running speed.
    l Modular project structure
    Create 63 blocks total (main program, sub program, interrupt program) and chose any programming language to program. The execution order of block can be adjusted at random. Each block can be imported and exported independently and has the same password protected of program projects. So we can fully realize the modular programming and program reuse dreams.
    l Convenient instruction form
    Provides multiple instruction tables. Use these tables can reduce the amount of programs, saving program space, such as initialization data. Each table can be imported and exported independently and has the same password protection of program project.
    l Powerful online networking
    Search out all the PLC that connect with the PC. Show running status, fault status, RUN / STOP switch position, hardware configuration information, communication port parameters such detailed information of all the online PLC. Select any PLC for online monitoring, program download, firmware upgrade, controlling PLC stop, adjusting PLC real-time clock, modifying password protection, modifying communication port parameters, modifying the watching-dog time and PLC station names.
    l Online monitoring and debugging functions
    Provide 10 pages of component’s monitoring table. It can choose in decimal, hexadecimal, binary, floating point and character to display data. Support component and register component monitoring hybridly and displaying component annotation at the same time. All instruction tables can be imported to the monitoring table.
    l Unique real-time curve functions
    Monitor any of the register elements of its real-time curve, convenient to control and debug during the process.
    l User friendly input method
    Provide shortcuts, drag and drop, click and many other command input. Suggest effective components or range of values for each input and output terminals. It can be entered directly. Some data of combination (such as communication protocols etc.) can also double-click the instruction to configure the input data.
    l Convenient annotation
    Provide the component comment, network comment, instruction comment, block comment, table comment, and project comment. After the component with “//” to input comments directly (e g.: X0 // motor start).Comments can choose to download to the PLC for reading or modification facilitately.
    l Detailed tips and online helps
    Provide PLC resource window, instruction window, etc. All the instructions and detailed description of hardware modules can be found in powerful online help system which is open through clicking F1 key in the programming interface to find the answer. Even if use HaiwellHappy programming software for the first time who can easily complete the preparation of control program.
    l Convenient editing functions
    Support all conventional editing operations, searching and replacing, instruction up and down, network up and down, copying and pasting between program projects.
    l Hardware configuration, sub program parameter passing, local components, indirection, print, preview, debugging, CRC calculation, password protection, etc.

    57 downloads

    Updated

  2. AUTOMGEN

    AUTOMGEN is an automation workshop for :
    - creating automation applications for PLCs and other tagets
    - creating SCADA applications
    - creating 3D process simulation
    - creating electric pneumatic and hydraulic simulation.
    Free 40 da

    1943 downloads

    Updated

  3. MAM-KY02s

    neet to reset alarm filter 

    171 downloads

    Updated

  4. ABB TotalFlow .NET Driver for HMI/SCADA

    The ABB Totalflow driver connects to ABB Totalflow devices that support the native Totalflow serial protocol. The Totalflow protocol is typically used in upstream Oil & Gas for process control and hydrocarbon measurement at the wellhead, as well as in midstream Oil & Gas facilities. Its capabilities provide data to SCADA, HMI, and measurement applications. The ABB Totalflow driver also collects historical Electronic Flow Measurement (EFM) gas and liquid data to work in conjunction with the EFM Exporter.
    Features
    - Supports all TotalFlow devices which uses tci.dll ver. 305.
    - High-speed communication
    - Suitable for transferring medium-to-large data volumes
    - Routing capability (i.e. can be used in the WAN)
    - Package-oriented data transfer
    - Support following functions
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     
     

    15 downloads

    Updated

  5. Modbus Master/Client for HMI/SCADA

    Overview:
    The Modbus Master or Client provides an easy and reliable way to connect Modbus Ethernet or serial Protocol Compliant devices with applications, including HMI, SCADA, Historian, MES, ERP and countless custom applications. This driver supports all Schneider Electric (modicon) PLC’s and all other devices which use Modbus as a protocol.
    Open to support future models for this series of PLCs.
    Features
    Modbus/TCP Client or serial Master for communication with Modbus Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP) Supports all Schneider Electric (Modicon) PLC’s or any other device which use any flavor of Modbus. Supports DANIELS/ENRON Modbus extensions. Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction. Performance –500mhz Pentium–10 words: 15msecs–100 words: 35msecs (avg) Full implementation of Class 0 and Class 1 Modbus functions as well as a subset of the most commonly used Class 2 functions This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers: Click here
    Complete Related Driver options: Click here
     
     

    69 downloads

    Updated

  6. WITS (Wellsite Information Transfer Specification) for HMI/SCADA

    The WITS Level 0 Active driver is used for the transfer wellsite data from one computer system (such as a Measurement While Drilling [MRD] device) to HMI, SCADA, and OPC client applications. Exploration and production service and operating companies are able to monitor real-time data like compass direction, borehole pressure, temperature, vibration, shock, torque, and more
    Features
    - Supports all device which uses standard WITS level-0 protocol.
    - Supports up to 256 WITS Level 0 Active devices
      -Single device per channel (peer-to-peer)
      - High-speed communication using embedded Ethernet tool.
      - Package-oriented data transfer
      -Data Types Support-Short, Long, Integer, Float, String
      -Support for WITS All Code Numbers
     This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    5 downloads

    Updated

  7. IDEC Micro3 Series (VBX) for HMI/SCADA

    Using Microsoft Visual Basic for Windows, Win’95 16 bits acquire/send data from or to IDEC Micro3® family PLC’s, with Parijat’s PLC custom controls in a friendly way by setting few properties only. VBX supports both 1:1 & 1: N drops. Read or write any PLC memory type including M, R, T, C, D, U etc. VBX’s are very fast and also do not require significant Windows resources as DDE drivers or servers do.
    Features
    -Extremely user friendly.
    -No software protection keys or disks.
    -Complete context-sensitive help and built-in manual.
    -Low Windows resource overhead.
    -No TSR’s to worry about.
    -Event-driven Object-Oriented Programming
     
    This product works with: Visual Basic, Visual C++
       
    We also develop custom Windows products and applications with PLC’s, MS Visual Basic, MS Access. We can also develop any ActiveX  that you may need developed for a specific purpose. We also have an GUI MMI software(Visual Process)  written in VB which provides basic SCADA monitoring, alarming, trending, reporting. With Visual Process,  any CAD drawings, manuals, vendor data sheets, instrument spec sheets, instrument calibration sheets or any other documentation associated with control systems may also be integrated with the MMI/SCADA system to help attain the ISO9000 certification!
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     
     

    5 downloads

    Updated

  8. Kloeckner Moeller PLC for HMI/SCADA

    Features
    -Supports all Moeller PLC’s using EasyComm Protocol or any other device which uses EasyCommprotocol .
    -Serail& TCP mode support
    -Can Connect to all 8 Net IDs
    -Performance – 2.2 GHz Dual Core - 10 words: 15msecs (avg)
     
    Memory Types Support
    -P buttons
    -EasyNet inputs
    -EasyNet outputs
    -Analog inputs base unit
    -Analog output, base unit
    -MDx, 1 to 20 double word marker
    -xRN1…xRN32, easyNet Receive data
    -xSN1…xSN32, easyNet Send data
    -ID1…ID16, Diagnostic bits
    -ID17…ID32, Additional diagnostic bits for MFD-Titan
    -LE1…LE3, Programmable LEDs for MFD-Titan
    -N1…N16, Additional Bit marker for easy500/700
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    10 downloads

    Updated

  9. EATON Cutler-hammer Incom protocol forImpacc systems for HMI/SCADA

    The Eaton cutler Hammer Incomprotocol for Impass systems driver from Parijat (ParImpacc), supports communication through serial or Ethernet ports to Eaton Cutler-Hammer devices using Incom or Impacc protocols, as a Master format. The driver enables users to capitalize on the low cost of communications equipment for use as the backbone for a power monitoring system and power quality analysis. ParImpacc can communicate with any serial via MINT or Ethernet viaEMINT device (Master Industrial Communications Network Translator), equipment as breakers, digital meters or motor overload relays. It supports communication with MPCV, IQ 200 & other Eaton devices. The IMPACC protocol module is designed to communicate with devices that use the ASCII version of the INCOM protocol to communicate with a host. 
     
    Features :
    Host-to-RTU commands supported:
    2024 -300  Get Fast Status 2025 - 305 Get Current Buffer 2026 - 308 Get Power Buffer 1 2027 - 309 Get Power Buffer 2 2028 - 30F (00003B) Get phasingVoltage 2029 3A4 Get INCOM Statistics 2030 3C8 Get Flags Buffer 2031 3C9 Get Setpoints This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     

    2 downloads

    Updated

  10. CTI E2572 for CTI 2500 or Simantic CP2572 Simantic 50x PLC Driver

    Features
    Client driver for CTI2572 Ethernet adapter for 2500 series CTI controllers or 500 or 505 series Siemens SimaticPLCs (old Texas Instruments) via CTI E2572P-ECC1, E2572  or CP2572 module.
    - Read and write V and K memory, discrete inputs X and outputs Y, word inputs WX and outputs WY, control registers, timers, drums, and system status words.
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    2 downloads

    Updated

  11. Thompson Scale 4693, TSC350 Driver for HMI/SCADA

    With ParTSCComm driver you can communicate via serial or Ethernet with Thompson Scale Checkweigher Systems Models 4693 and TSC-350, emulating the Stat Pak-PC Data Exchanges.
    Features
    Customer_Name Product_Desc High_Reject_Limit High_Pass_Limit Target_Weight Low_Pass_Limit Low_Reject_Limit Container_Weight Weight_Unit Save_Product_Number Run_Product_Number Product_Listing_On Product_Listing_Off Print_Interim_Report Print_Final_Report Print_Product_SetUp_Listing Clear_Stat_Buffer This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    1 download

    Updated

  12. LON Echelon via Smart-Server for HMI/SCADA

    The Smart Server is a versatile smart energy manager that connects control devices to IP-based applications such as enterprise energy management, demand response programs, street light management systems, and high-value remote asset management programs.
    Features
    - Supports all Lon work Devices’ or any other device which uses Smart-Server by Echelon with SOAP calls as a master/client.
    Specify model #s, mem types
    - High-speed communication
    - Routing capability (i.e. can be used in the WAN)
    - Package-oriented data transfer 
    - Performance – 2.2Ghz Intel - 10 words: 15msecs - 100 words: 35msecs (avg)
       This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    1 download

    Updated

  13. Emerson Bristol BSAP Driver for HMI/SCADA

    FEATURES                                                                 
    - Client driver for  Emerson Process (old Bristol Babcock) gas and liquid flow computers& controllers, supporting BSAP protocol. Includes series 3000 &Controlwave systems.
    -Both IP & Serial port connections supported.
    - Supports reading and writing signal tags by name and address, including retrieval by match function.
    - Reading archive and audit trail data.
    - Reading and writing to analog and digital arrays.
    - Transactions configured via strongly typed transaction objects.
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    7 downloads

    Updated

  14. PAROCK1 for HMI/SCADA

    Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic. 
    Features
    -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support
    Requirements
    -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions.
    -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities
    -TCP/IP Interface Modules from Rockwell/AB supported, are:
    -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later
    -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later
    -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later
    -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later
    -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later
    -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later
    Other Related Services/Items
    -Custom PLC Add-on instructions building
    -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers
    -Custom development, Technology Transfer Services 
    -Other Non-AB communication drivers for serial or TCP 
    -Full control system integration, training, architecture design
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    7 downloads

    Updated

  15. Omni Flow Computer Driver for HMI/SCADA

    The OMNI Flow Computer driver provides the ability to communicate with the OMNI 3000 and 6000 family of flow computers. It supports both real-time communications and Electronic Flow Measurement (EFM) for historical data. For real-time only communications, the OMNI Flow Computer driver can be purchased individually or as part of theOil and Gas Suite. For applications requiring EFM and real-time communications, the OMNI Flow Computer driver can be purchased as part of the EFM Suite. EFM capabilities include scheduling and exporting EFM History, Alarms, and Events data to industry standard and custom formats.
    Features
    - OMNI.Net Client (Master) for communication with OMNI Slaves (Via standard PC serial ports, USB adapters; RTU and ASCII encapsulation in TCP/IP as well as Modbus TCP)
    - Supports all OMNI devices which uses flavor of OMNI Protocol.
    - Supports 1,3,5,7,9,11,13,15,17 memory types
    - Can read up to 128 Words of Input / Holding registers or 2000 Bits of Discrete Coils / Input coils in one transaction.
    - Performance - 500mhz Pentium - 10 words: 15msecs - 100 words: 35msecs (avg)
    - Full implementation of Class 0 and Class 1 OMNI protocol functions as well as a subset of the most commonly used Class 2 functions
     This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     
     

    10 downloads

    Updated

  16. Brooks Petrocount Meters (Emerson) for HMI/SCADA

    General Info
    Developed using state of the art Microsoft MFC4 technology for enhanced throughput and low overhead, Parijat’s PLC communication 32-bit OLE custom controls (OCX), acquires/sends data from or to Brooks Petrocount family products via its serial port. Support for IMS, RMS, and SMS is built in. Read or write any slave memory type. Manipulate properties using our custom property sheets for utmost user-friendliness at design time. Modem party line control is built in. Rapid exception processing is available with our CompareInfo method, and auto polling interval may be set or control polling through your code for optimum performance. OCX’s are very fast and also do not require significant Windows resources as DDE drivers or servers do.
    Features
    -No software protection keys or disks
    -Complete context-sensitive help and built-in-manual
    -Works in Windows 95, 98, NT, 2000, XP and Vista.
     
    Methods: Refresh, PortOpen, CompareInfo
    Events: Outcome (fires when communication transaction completes)
    Throughput: Reads 120 consecutive words in 130 msec @ 19.2k
    This product works with:
    Microsoft Visual Basic, Visual C++/J++ , Office97, Foxpro95 or any other OLE container.
    Related VBX Products: Modbus Master & Slave.
     
     
    We also develop custom Windows products and applications with PLC’s, MS Visual Basic, as well. We can also develop any ActiveX  that you may need developed for a specific purpose. We also have an GUI MMI software(Visual Process)  written in VB which provides basic SCADA monitoring, alarming, trending, reporting. With Visual Process,  any CAD drawings, manuals, vendor data sheets, instrument spec sheets, instrument calibration sheets or any other documentation associated with control systems may also be integrated with the MMI/SCADA system to help attain the ISO9000 certification!
      This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here 
     
     
     
     
    General Info
    Developed using state of the art Microsoft MFC4 technology for enhanced throughput and low overhead, Parijat’s PLC communication 32-bit OLE custom controls (OCX), acquires/sends data from or to Brooks Petrocount family products via its serial port. Support for IMS, RMS, and SMS is built in. Read or write any slave memory type. Manipulate properties using our custom property sheets for utmost user-friendliness at design time. Modem party line control is built in. Rapid exception processing is available with our CompareInfo method, and auto polling interval may be set or control polling through your code for optimum performance. OCX’s are very fast and also do not require significant Windows resources as DDE drivers or servers do.
     
     
      Features
    -No software protection keys or disks
    -Complete context-sensitive help and built-in-manual
    -Works in Windows 95, 98, NT, 2000, XP and Vista.
    Methods: Refresh, PortOpen, CompareInfo
    Events: Outcome (fires when communication transaction completes)
    Throughput: Reads 120 consecutive words in 130 msec @ 19.2k
    This product works with:
    Microsoft Visual Basic, Visual C++/J++ , Office97, Foxpro95 or any other OLE container.
    Related VBX Products: Modbus Master & Slave.
     
    We also develop custom Windows products and applications with PLC’s, MS Visual Basic, as well. We can also develop any ActiveX  that you may need developed for a specific purpose. We also have an GUI MMI software(Visual Process)  written in VB which provides basic SCADA monitoring, alarming, trending, reporting. With Visual Process,  any CAD drawings, manuals, vendor data sheets, instrument spec sheets, instrument calibration sheets or any other documentation associated with control systems may also be integrated with the MMI/SCADA system to help attain the ISO9000 certification!

    4 downloads

    Updated

  17. Schweitzer SEL IEDs for HMI/SCADA

    Acquire or send data with Schweitzer SEL devices (SEL 501-2, SEL 587, SEL 351R, SEL 451). Using Microsoft .NET for Windows 2000, XP, Vista, via serial or TCP/IP protocol, with Parijat’s custom controls in a friendly way, by setting just a few properties. Read and write signals via names, addresses, and lists. Download audit logs and archive files. Property based configuration with only three methods makes communication a breeze. Manipulate communication port parameters for flexible communications through modems. .NET components are very fast and do not require significant Windows resources as OPC drivers or servers do.
    Features
    -Extremely user friendly
    -No software protection keys or disks
    -Complete context-sensitive help and built-in-manual
    -Low Windows resource overhead.
    -Works with Windows 2000, XP and Vista.
    -Event-driven Object-Oriented Programming
     
    Methods: Open, Close, RefreshInfo
     
    Events: OutCome (fires when a communication transaction completes)
     
    This product works with: Visual Studio  or any .Net component container application. 
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     

    4 downloads

    Updated

  18. DSM3260 CEMS Analyzers for HMI/SCADA

    Features
    ParDSM3260 driver can provide control& monitoring of DSM 3260 analyzer units (data acquisition and control unit, from Odessa Engineering). It helps  record average or instantaneous voltages having DSM 360 as a digital voltmeter, via its RS-232 port.
    This driver supports .NET Framework 1.1
     
    Driver functions:
    T-ReadTime
    WriteTime
     P-Read5minute
    H-ReadHourlyCurrent
    1-ReadHourlyPrevious
    C-ReadCal
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     

    0 downloads

    Updated

  19. IDEC PLC Microsmart for HMI/SCADA

    Overview:
    IDEC MicroSmart series PLC is the next generation of programmable logic controller. These flexible, adaptable PLCs are as compact as they are powerful, so you can create the system you need without increasing your space requirements or your budget. MicroSmart CPUs are available with built-in 10, 16, and 24 I/O All-In-One units, and 20 and 40 I/O slim style models.
    Features:
    IDEC PLCs using Microsmart protocol driver from Parijat (CFIDEther) supports communication with several IDEC PLC’s like FC4A Series, ONC Series, Micro3 and Micro3C series, using Microsmart protocol. It is for MS Compact Framework.
    This driver fully supports I/O PLC Types 10, 16, 20, 24 and 40.
    Memory Types supported
    X-Input N byte, Y-Output N byte, M-Internal relay N byte, R-Shift register N byte, T-Timer preset N byte, C-Counter preset N byte,t-Timer current N byte, c-Counter current N byte, D-Data register , x-Input 1 bit,  y-Output 1 bit , m-Internal relay 1 bit,  r-Shift register 1 bit, E-Error code, I-Link formatting sequence,   K-Scan time, N-Plc system program version, P-User program in ASCII format, Q-Confirm Timer/counter preset, S-Plc operating status, V-User program protection, W-Calendar/clock, Z-System reset, Timer information,  Counter information, Timer preset status, b-Counter preset status, d-Timertimpout status,e-Countercountout status.
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here
     

    15 downloads

    Updated

  20. ThompsonScale 4693, TSC350 for HMI/SCADA

    Features
    With ParTSCComm driver you can communicate via serial or Ethernet with Thompson Scale Checkweigher Systems Models 4693 and TSC-350, emulating the StatPak-PC Data Exchanges.
     
    Commands Supported:
    Customer_Name
    Product_Desc
    High_Reject_Limit
    High_Pass_Limit
    Target_Weight
    Low_Pass_Limit
    Low_Reject_Limit
    Container_Weight
    Weight_Unit
    Save_Product_Number
    Run_Product_Number
    Product_Listing_On
    Product_Listing_Off
    Print_Interim_Report
    Print_Final_Report
    Print_Product_SetUp_Listing
    Clear_Stat_Buffer
    This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
    For More Info
    Overview of Parijat Drivers: Click here 
    Additional supporting Info about Parijat Drivers:Click here
    Complete Related Driver options: Click here

    3 downloads

    Updated

  21. Temperature measurement using Arduino Nano, RTD PT100 temperature sensor and 4-20 mA transmitter

    Temperature measurement usind Arduino Nano, RTD PT100 sensor,  4-20 mA current loop transmiter, and a python app for visualization

    130 downloads

    Submitted

  22. Opto22 SNAP UP1 ADS read network settings using Linux

    Opto22 PAC SNAP UP1 ADS read network settings using Linux or other OS using a serial port terminal app

    11 downloads

    Submitted

  23. Video Game running in an Opto22 PAC using RFB protocol and VNC

    Video game application running in an Opto22 PAC using RFB protocol and VNC client as interface, can be played with the Free simulator PAC Sim

    1 download

    Submitted

  24. Red Lion Crimson G315 Game Exploding Truck Derby

    I got a little carried away with this exploration of rotation animation with Crimson 3.0
    r005 2012-07-04:PEC:

    Improved shields, now available at 100% to start the game, shows up as unfilled ellipse around the truck. Can be used to put out your own truck when on fire. Improved truck steering...still not where I want it added 2 pages running at enhanced and overdrive update modes respectively Made end of game appearance transparent, with action continuing in the background. Improved tag names fixed problem with restart not working improved collision detection beginnings of comments
    r007 2012-07-04:PEC:
    Added fire button (single shot, level 2 and up) Increased number of animated enemies to 28 Changed Game Over font (missing on old XP machine) Altered circular movement of targets
    r007a: Fixed problem with collision loop (spontaneous explosions!)
    --Performed conversion to G310, fixed a few over sized fonts and added that version to the zip (soon to test with real hardware!)
    r008: Made numerous polishing touches:

    Hero truck is now colored magenta. Some of the images have a transparent background. Added extra lives with indicators Changed missile and enemy travel limit logic Adjusted shield rates to make the game more playable Remodeled control panel
    Bugs:
    -Missile occasionally gets taken over by Auto program. Sort of a good bug for a video game, so I decided not to fix it yet. I may add a flag later to make this bug selectable.
    -Images need black pixels replaced with transparent ones to allow alternative play-field colors/patterns.
    -Observed failure to complete a level when hero is sole survivor.
    -Still need to tone down speed especially after level ten when using the overdrive update rate (Page3).
    Wow, at least in the emulator, Crimson is more than fast enough to reproduce the old school arcade action.
    I am still having fun with this thing, tinkering with pattern animation now, but the little blurb of a graphics speed test turned video-game had no spine.
    I have successfully inverted the code and wrappered it storybook 2-d shooter style, and will be posting some variation of the Galaga shooter type of level, some mountain jumping. It may be a while before I finish chugging through the new structure, so I can do space invasions and galaga and whatever else. I can't wait to try this on real hardware. Picture a portrait view with the Menu button being a fire button, so you could touch one action and still shoot at the same time, right?
    This is cool as he<L...
    Wow, I remember being amazed by the Crimson 3.0 script language on first sight, but now with the graphical editor being a work of functional genius...I am in love.
    What a powerhouse!
    Then, I need to turn the pattern matching game result toward a work related packaging department to convince the powers that they don't need more checkweighers, I can upgrade three they have...they started to understand, but I can prove it with real time sensor (photoeye + PLC position tracking logic)...substitute my exploding truck for cases of patties, and show them how they would flow with my process changes...I think I did spend a couple of hours on the clock with this, polishing and uploading it, so my employer should get something back from that effort.
    So, I need cartons flowing around curves, 180 degrees, 45's, two diverters, case check weigh stations, manual stations, carton sealers, then toward the robot area where theres another diverter. This game engine can already position 40 objects and update their data with such quickness...I will be leery about using the Overdrive mode in a production control setting after reading what Red Lion wrote in the help file...
    I need some one who understands widgets, to help me make an "Action Figure" widget out of my O tag folder and related graphics elements too.
    G3 Truck Shoot 'em Up r001
    This one is almost playable...minor tweaking could make it more challenging. It allows multiple missiles to be fired with no minimum delay between. This makes it unfair. The other changes are numerous. I turned the program inside out as far as logic flow, and this would enable further expansion and addition.

    892 downloads

    Updated

  25. Red Lion G315 Animated Packing Conveyors

    With the truck shootout graphics as a basis, I made a work related effort by modelling one of our packing areas.
    This file runs in the Crimson 3.0 emulator and will display little pink fill animated boxes to represent cartons of product being manually filled.
    Once each of the 21 pack stations get a box full, it is popped onto the conveyor belt and moves along through the process.
    Each object takes up space along the whole path which is defined with lots of hard code. I built tools to teach those positions intially, without thinking about making the project portable...those retentive tags didn't seem to make it to my thumb drive...so I taught the path easy peasy with the emulator running, then painstakingly added hard code to poke those position values into array points.
    Each belt has an adjustable "rate" which is not tied to reality (yet). I found that the speed with which the emulator updates a page varies dramatically from one PC to the next. At home, I switch the display page properties to overdrive and get about 15 updates per second when there are 20 or more boxes flying around. At work, I get 40-60 updates per second so I slow it down to enhanced mode.
    The unlabeled data in the lower left is my quick and dirty method for "frames per second" or updates per second.
    EDIT r001: After my little doh! (why don't i just count frames in my existing once per second subroutine?), I discovered the undocumented system variable already doing just that.
    EDIT r001a: Oops, set the background task back to by caller, went ahead with my dispcount to real time compensation with the goal of having decent accuracy once I later apply real world measurements to my scale factors.
    Someone may have advice for my calculation of DIspFactor, but the goal is to be able to update the positions of the now 25 animated weight stamped cartons along the path at a control reliably but smooth and pretty rate.
    I am most certain my code can be tightened, I am unsure what impact the postiion (within branches of logic) affect the overall performance of the final code, or if access to a Crimson tag is faster...
    All comments and criticisms are welcomed on the discussion link.
    At some point, I will improve that bit of math and find a way to get realistic behavior from my animation with varying update rates, probably by using that frame rate calculation.
    At the present state, this file is suitable for sharing and others may find it useful for ideas. For actual usefulness at work, I intend to get the animation timing/speeds realistic first, then add controls which allow a user to select our various production arrangements (which affect pack station fill rates) and then allow adjustment of line speeds to model the results...
    How much time do we really have at each scale to make weight and close the liners, etc?
    This model should help us find out in a very graphical and intuitive way.
    There are some other neat things I played with, like dynamically switching the background color (click on the updates per second value) and using Dec2Text to move the case weight onto the moving animated rectangles so they travel carrying the numbers along with them. I used 4 pointed star (missile from the video game) for my rectangles this time instead of overlaid images. The 4 pointed star already has a rotation property and can be adjusted to look remarkably like a carton of beef patties!
    It isn't bug free. Earlier today, I watched it knock a box off the conveyor near one of the kickers. It looked too realistic then. Must be a problem with some of that digital cardboard I used or that virtual air pressure going to the kicker ;)
    Have fun!
    I should add some operating instructions:
    Only one of the "trough percent fill" values is animated, the others are what truly determines whether there is a chuck worth packing onto the pink fill animated pack table.
    You can disable each of the pack tables by clicking them, the border will flash when disabled, but the trough is actually what you are disabling (whether you can see the trough or not, one exists in tag form for each trough).
    The button marked OFF is the diverter mode selector, "all", "alternate "or "off", click to step through the 3 modes of operation of the kicker to the offset line (one of the Win. tag objects elements acts like a conveyor section mathematically...)
    Paul
    Well, it's obvious I would need some sort of mathematical miracle to be able to derive any accurate measure of time less than one second, so I will go the feed forward route and alter my DispFactor to correct for time by multiplying another scaling factor derived from number of visible Objects which drops my update rate to about 1/3...I am not even yet counting how many packets are visible...
    The latest version has company related process capability info and details, so I won't post it. If i conquer the time thingy, (and I will, even if it means another layer or three of self learning or calculated scheduled gains) or Mike Granby coughs up a 0.1 second or better timebase, I will strip it back down of proprietary info, and post it in the future...If not, it shall remain a toy...until I drop it in a real an app and connect the O.position tags to PLC tags...and emulate that way...I was hoping to build a highly accurate and fast updating offline emulator to give to the production gods to run on their own... Who knows what the DispFactor will be in a real G315? I probably will have to switch to a G310 to find out...
    Paul

    833 downloads

    Updated

Sign in to follow this  
Followers 0