Forums.MrPLC.com > How To Determine ControlLogix Series?

Full Version: How To Determine ControlLogix Series?

Forums.MrPLC.com > PLCs and Supporting Devices > Allen Bradley

brianafischer

Jul 19 2006, 10:57 AM

I need to order a replacement battery for a system, but I am not sure if the controller is Series A or Series B. I only have the RSLogix5000 program. Under the controller properties, I have a 1756-L61 revision 15.4. Can I determine it from here?

Thanks!

newpageboba

Jul 19 2006, 11:42 AM

I used RSLinx to determine the Series.
Right click on the module and pick Device Properties.

I have a 1756-L63/B LOGIX 5563

brianafischer

Jul 19 2006, 11:48 AM

QUOTE(newpageboba @ Jul 19 2006, 12:42 PM) [snapback]37027[/snapback]

I used RSLinx to determine the Series.
Right click on the module and pick Device Properties.

I have a 1756-L63/B LOGIX 5563

I didn't design this system, but was e-mailed the program. The plant is a plane flight away, and I don't have any physical access to it. The only reference I have is the program! Help!

TWControls

Jul 19 2006, 01:31 PM

I don't think you will find it in the program. Have someone at the plant pull the processor out and look at the label on the side of it. It states it there.

Or have someone get the part number off of the battery

brianafischer

Jul 19 2006, 01:38 PM

QUOTE(TWControls @ Jul 19 2006, 02:31 PM) [snapback]37039[/snapback]

I am waiting on this right now. Just wanted to know if there were any "tricks" to find out...

Contr_Conn

Jul 19 2006, 01:44 PM

Visual identification:
Ser B controller has a BLUE battery and CF slot on the front of the processor.

brianafischer

Jul 19 2006, 07:05 PM

QUOTE(Contr_Conn @ Jul 19 2006, 02:44 PM) [snapback]37041[/snapback]

Visual identification:
Ser B controller has a BLUE battery and CF slot on the front of the processor.

Thanks, I took a look at the ControlLogix manual and notified the electrician of what to look for.

This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.