brahem2005
Nov 29 2005, 08:48 AM
hallo
i need the software to upload and download to the nt11s ...can someone send me a programm or tell me where can i download it
many thanks for all
gtsuport
Nov 29 2005, 10:14 AM
You will need Omron NTST (NT Series Support Tool). Please contact your local Omron Distributor to purchase the software.
brahem2005
Nov 29 2005, 11:23 AM
| QUOTE (gtsuport @ Nov 29 2005, 10:14 AM) |
| You will need Omron NTST (NT Series Support Tool). Please contact your local Omron Distributor to purchase the software. |
is there no software as freeware ???
i have 3 disc i've get it with my nt11s but they are damaged from omron i don't get any reponse
thanks
gtsuport
Nov 29 2005, 11:58 AM
I believe what you are referring to is a very old DOS based software. It has not been available for several years.
I do not know of any free software that will back up / restore the application in the NT11S.
Sorry.
PdL
Nov 29 2005, 12:45 PM
Indeed I believe the follow up on the dos software (NT11S-ZA3AT-EV1) is the NT Support Tool.
And unfortunately it's licensed.
I don't believe you can use the NTSS dos software, which is in the download section. Probably pre-NT11S.
But maybe one of the real gurus have a copy of the NT11S ST if it's unlicensed or freely distributable.
Here are some manuals though for your information.
NT11S Operation Manual V029-E1-2 NT11S Support Tool Operation Manual V030-E1-1 To answer the question in the other topic you opened (please keep questions related to the same subject in the same topic)
| QUOTE (brahem2005 @ Nov 29 2005, 02:50 PM) |
Hallo
I have a NT11S the display and just the display is deffekt and i need to copy the flash to the new one, i don't know which programm can i use and which cable?
i see that there's a omron support tool software i don't find it but i want to know if with this software can i read the flasch and write it back to another one???any other solution?
thanks |
Uploading the application from an NT11S and downloading to another is possible with NTST. It would be a bit difficult though to get the PT in transmit mode when the screen is dead. Just follow the manuals closely.
Or is it just the backlight ?
Because then maybe you could just exchange the backlight of the other non programmed unit yourself !? Never seen the inner works of an NT11S myself but it's worth a look.
Then you won't need any software or cables.
gtsuport
Nov 29 2005, 01:18 PM
Yes, I checked a copy of NTSS v2.33, no NT11S support.
Sleepy Wombat
Nov 29 2005, 04:36 PM
Here is a copy of the old DOS version. I am not sure if it will work with newer versions of the NT11S though.
nguyenthanhcanh
Nov 30 2005, 05:02 AM
Hi brahem2005,
Pls check the link in your email.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.