Forums.MrPLC.com > Modicon PLC software

ballvietnam

Jul 4 2009, 03:27 AM

Hi every body
I am new.I have just begun using premium PLC. I use PL7 4.5 to program for it but I don't how to simulate it.who could tell me any simulation program for PLC of Schneider
thanks

aggattapauer

Jul 4 2009, 05:29 AM

XIN CHAO

the PLC simulator is integrated in Unity Software for all new CPU's (M340, Premium Unity, Quantum Unity, Quantum SIL2, and soon Quantum SIL3)

the last release is UNITY PRO V4.1

PLC TWIDO too has integrated software simulator in Twidosuite plattform

ballvietnam

Jul 4 2009, 07:32 PM

thank for your regard
I looked for some where even in Schneider Electric.com to download unity pro but I haven't found it. could you tell me where I can download demo or trial version?
Can you speak Vietnamese?
CAM ON

aggattapauer

Jul 5 2009, 05:43 PM

I don't think a demo version is uploadable from internet, tomorrow I'll check.

No I can't speak Vietnamese... I worked for six months in 2001 in Vietnam (near Hanoi) but I remember just few words.. eheh Khong tot!!!

ballvietnam

Jul 5 2009, 11:02 PM

QUOTE (aggattapauer @ Jul 6 2009, 05:43 AM)

I don't think a demo version is uploadable from internet, tomorrow I'll check.

No I can't speak Vietnamese... I worked for six months in 2001 in Vietnam (near Hanoi) but I remember just few words.. eheh Khong tot!!!

thank
I am waiting for you . I want to ask you one more question:
I use TwidoSuite to program Twido PLC but I can't simulate proccess because I can't find the S symbol on Quick Access Bar.
thank alot

Camel

Jul 7 2009, 08:43 AM

Unity is downloadable from http://eclipse.modicon.com

Login and search for Unity. (You have to have a support agreement with Schneider)

Can you not change the programing software used by changing the os on the processor?

aggattapauer

Jul 7 2009, 02:18 PM

QUOTE

I use TwidoSuite to program Twido PLC but I can't simulate proccess because I can't find the S symbol on Quick Access Bar.
thank alot

You must have twidosuite V2.20 or greater

ballvietnam

Jul 8 2009, 10:06 PM

QUOTE (aggattapauer @ Jul 8 2009, 02:18 AM)

QUOTE

I use TwidoSuite to program Twido PLC but I can't simulate proccess because I can't find the S symbol on Quick Access Bar.
thank alot

You must have twidosuite V2.20 or greater

thank aggattapauer.It is lucky when next time Schneider Electric will support our department many products includes : Twindosute 2.1

ballvietnam

Jul 8 2009, 10:08 PM

QUOTE (Camel @ Jul 7 2009, 08:43 PM)

Unity is downloadable from http://eclipse.modicon.com

Login and search for Unity. (You have to have a support agreement with Schneider)

Can you not change the programing software used by changing the os on the processor?

thank Camel.

aggattapauer

Jul 9 2009, 07:58 AM

The latest version is Unity Pro V4.1 with new hardware (for M340), improvement of Quantum HSBY management, integrated Advantys Island I/O scanning configuration (needs ACS V4.5), and other I don't remember..

booatoa

Jul 13 2009, 01:52 AM

Hi ballvietnam

have you got the unity pro software, if you havnt got it please contact me by following email, I will send you the software even manual as well if you need

my email: (removed)

Crossbow

Jul 13 2009, 07:17 AM

You realize it's illegal to send him the software right? That's software piracy. Discussion of such things on this website is against the terms of service.

ballvietnam

Sep 25 2009, 04:27 AM

thank everyone
I have aready had Unity Pro 4.0
thank everyone again

booatoa

Oct 6 2009, 06:34 AM

QUOTE (Crossbow @ Jul 13 2009, 07:17 PM)

You realize it's illegal to send him the software right? That's software piracy. Discussion of such things on this website is against the terms of service.

Sorry Crossbow. The software I intended to send to ballvietnam is the trial one.

Sorry for not saying clearly

Regards,

Crossbow

Oct 6 2009, 08:06 AM

Trial software is fine. In fact, you can post it in the Downloads section here, as there are categories for demo software under each manufacturer.