Hardware configuration successfully imported.

---------- Importing from: C:\LM90\20080331\SN13726. ----------

Processing: _MAIN.dec....
_MAIN.dec successfully processed.

Processing: _MAIN.I....
_MAIN.I successfully processed.

Processing: _MAIN.Q....
_MAIN.Q successfully processed.

Processing: _MAIN.M....
_MAIN.M successfully processed.
Notice: C:\LM90\20080331\SN13726\*.S not found.
Notice: C:\LM90\20080331\SN13726\*.SA not found.
Notice: C:\LM90\20080331\SN13726\*.SB not found.
Notice: C:\LM90\20080331\SN13726\*.SC not found.

Processing: _MAIN.G....
_MAIN.G successfully processed.

Processing: _MAIN.T....
_MAIN.T successfully processed.

Processing: _MAIN.R....
_MAIN.R successfully processed.

Processing: _MAIN.AI....
_MAIN.AI successfully processed.

Processing: _MAIN.AQ....
_MAIN.AQ successfully processed.
Notice: C:\LM90\20080331\SN13726\*.GA not found.
Notice: C:\LM90\20080331\SN13726\*.GB not found.
Notice: C:\LM90\20080331\SN13726\*.GC not found.
Notice: C:\LM90\20080331\SN13726\*.GD not found.
Notice: C:\LM90\20080331\SN13726\*.GE not found.

Processing: _MAIN.IO....
_MAIN.IO successfully processed.
Notice: C:\LM90\20080331\SN13726\*.QO not found.
Notice: C:\LM90\20080331\SN13726\*.MO not found.
Notice: C:\LM90\20080331\SN13726\*.GO not found.

Processing: NOROBT.ste....
NOROBT.ste successfully processed.

Processing: EARLYIJ.ste....
EARLYIJ.ste successfully processed.

Processing: KEYPAD.ste....
KEYPAD.ste successfully processed.

What is your question?

Processing: _MAIN.pdt....
Unable to Decompile file due to unsupported content.
Error: Failure reading C:\LM90\20080331\SN13726\_MAIN.pdt.
Error: Unable to import the logic file.

---------- Import complete. ----------


---------- Import failed. ----------

why my program can not import compelet

import failed

anyone can help me ,thanks!

Are you sure that the original Logicmaster file is for the same model PLC as the VersaPro folder? It doesn't work if you try to import a 90-30 PLC file into a VersaMax PLC folder, for example. Do you have Logicmaster software? If so, open the file with Logicmaster to find out what model PLC it was written for.

Personally, I think you should be importing into Proficy Machine Edition rather than VersaPro. VersaPro has too many bugs that will forever remain unfixed.