Forums.MrPLC.com: Modbus Master RTU with digital inputs - Forums.MrPLC.com

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Modbus Master RTU with digital inputs Seaching for Modbus Master RTU with digital inputs Rate Topic: -----

#1
User is offline   Chrissi 

  • Hi, I am New!
  • Pip
  • Group: MrPLC Member
  • Posts: 1
  • Joined: 01-October 06
  • Country:Germany
    Germany
Hello together,

this is my first posting here.
You have an nice and useful forum and I hope you can help me
with my small probem.

I am searching for a small PLC with min. two digital inputs that act as Modbus Master RTU over RS485
(8 Databits, no parity, 2 Stopbits) half duplex.
It only have to support function code 6 .(more is OK but not needed)
The device should be connected to a Modbus Slave and by setting one of the digital
inputs it have to write a selected value to a register (40XXX) by using FC 06. If the digital input is .
not setted it have to write an other selected value to the same register.
It is also possible to realize it with two digital inputs setted alternately.
I have found a device I can use at WAGO.com (WAGO I/O series) but it is expensive
and the software also.
If somebody have a tip, a link or something else please let me know.

Many thanks

Christoph
0

#2
User is offline   Steve Bailey 

  • Maverick
  • PipPipPipPip
  • Group: MrPLC Member
  • Posts: 646
  • Joined: 23-December 02
  • Location:Berkshire County, Massachusetts
  • Country:United States
    United States
The DL05 and DL06 PLCs from Automation Direct PLCs can be Modbus RTU masters.

If price is your primary consideration, the DL05 prices start at $99.
The DL06 starts at $199 but it includes easier to use serial read and write instructions in its function set.

http://www.automationdirect.com
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users