Sign In »
Register Now!
Help
Quick question.
Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode?
When we have a power outage it automatically starts up in Auto mode.
Any help would be great.
Thanks
Page 1 of 1
PowerFlex 70 Startup
Rate Topic:
#1
Posted 19 September 2012 - 01:18 PM
- Sparky
-
- Group: MrPLC Member
- Posts: 39
- Joined: 07-May 04
- Gender:Male
-
Country:Canada
Back to top
#2
Posted 19 September 2012 - 11:06 PM
- The Wizard
-
- Group: MrPLC Admin
- Posts: 3,127
- Joined: 27-March 06
- Gender:Male
- Location:Southern Indiana
-
Country:United States
Mac, on 19 September 2012 - 01:18 PM, said:
Quick question.
Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode?
When we have a power outage it automatically starts up in Auto mode.
Any help would be great.
Thanks
Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode?
When we have a power outage it automatically starts up in Auto mode.
Any help would be great.
Thanks
RTM - Page 37/190 Parameter "Digital In4 Sel "
BobLfoot
"Poor Planning on your part does not a crisis on my part make"
"Poor Planning on your part does not a crisis on my part make"
#3
Posted 20 September 2012 - 06:24 AM
- Sparky
-
- Group: MrPLC Member
- Posts: 39
- Joined: 07-May 04
- Gender:Male
-
Country:Canada
Sorry.
Forgot to mention that we are running it from the HIM plugged into the front of the unit.
There are no terminal speed commands other than the default speeds.
All conveyor speed changes are made from the HIM.
I read that section of the manual ..at the end of that section it says : "2. If a HIM has manual control and power is removed from the drive,
the drive will return to Auto mode when power is reapplied."
RTM - Page 37/190 Parameter "Digital In4 Sel "
Forgot to mention that we are running it from the HIM plugged into the front of the unit.
There are no terminal speed commands other than the default speeds.
All conveyor speed changes are made from the HIM.
I read that section of the manual ..at the end of that section it says : "2. If a HIM has manual control and power is removed from the drive,
the drive will return to Auto mode when power is reapplied."
BobLfoot, on 19 September 2012 - 11:06 PM, said:
Mac, on 19 September 2012 - 01:18 PM, said:
Quick question.
Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode?
When we have a power outage it automatically starts up in Auto mode.
Any help would be great.
Thanks
Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode?
When we have a power outage it automatically starts up in Auto mode.
Any help would be great.
Thanks
RTM - Page 37/190 Parameter "Digital In4 Sel "
Share this topic:
Page 1 of 1