Forums.MrPLC.com: ABB DriveWindow 2.30 Communications - Forums.MrPLC.com

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

ABB DriveWindow 2.30 Communications Rate Topic: -----

#1
User is offline   dmargineau 

  • Sparky
  • PipPipPip
  • Group: MrPLC Member
  • Posts: 292
  • Joined: 24-August 10
  • Country:United States
    United States
Has anyone tried to use the Title mentioned software to interface to an ABB ACS800 using the USB to fiber optic RUSB-02 adapter.?!
Frustrating is the sugarcoated description of our efforts!!! :burn:
We've managed to connect to a drive JUST ONCE!!! After saving the Parameter File and restarting the software we haven't been able the "replicate" our unique success again!!!! :shrug:
-replaced the fiber optic cables
-tried connecting to a drive running the newest revision software
-installed the software on a different machine
-called ABB Support numerous times. :slydog:

Any suggestions will be greatly appreciated. :wacko:
Anticipated thanks!
:helpme: :helpme: :helpme: :helpme:
0

#2
User is offline   dellae 

  • Sparky
  • PipPipPip
  • Group: MrPLC Member
  • Posts: 22
  • Joined: 31-August 05
  • Location:Papatoetoe
  • Country:New Zealand
    New Zealand
The system must be connected and drive powered on before you start drivewindow - otherwise you need to disconnect then reconnect.
Have you tried swapping the fibre optic cable connection at the RUSB-02 - the connection identification is typical ABB.

The drivewindow 2.30 software must be installed BEFORE you ever plug the RUSB-02 unit into the PC otherwise it will fail.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users