Forums.MrPLC.com: PC to SLC500 Programming Cable? - Forums.MrPLC.com

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

PC to SLC500 Programming Cable? RS232 Programming Cable Rate Topic: -----

#1
User is offline   Sharkster 

  • Newbie
  • PipPip
  • Group: MrPLC Member
  • Posts: 7
  • Joined: 30-January 07
  • Country:United States
    United States
Hello,

Does anyone have a pinout for a programming cable from a PC RS232 port or Ethernet Card to an SLC500? Or does such an animal exist?

Thanks for any help.
0

#2
Guest_trn_psycho_*

  • Group: Guest
Look here...
http://forums.mrplc....ds&showfile=595

This post has been edited by trn_psycho: 08 March 2007 - 11:10 AM

0

#3
User is offline   jstolaruk 

  • industrial sorcery
  • PipPipPip
  • Group: MrPLC Member
  • Posts: 429
  • Joined: 08-April 05
  • Gender:Male
  • Location:SE Michigan
  • Interests:Golf, Shotgun Sports
  • Country:United States
    United States

View PostSharkster, on Mar 8 2007, 11:04 AM, said:

Hello,

Does anyone have a pinout for a programming cable from a PC RS232 port or Ethernet Card to an SLC500? Or does such an animal exist?

Thanks for any help.


Depends on the SLC/500 model you want to use.

SLC-500, 5/01, 5/02 didn't support RS232 so you need a PIC or UIC to work with their DH-485 interface (looks like a Ethernet connection but its not).

SLC-5/03, 5/04, 5/05 support RS232 and you need a null-modem cable ( pins 2 & 3 swapped, pin 5 for common)

the SLC-5/05 supports Ethernet and the normal rules apply.
0

#4
User is offline   Sharkster 

  • Newbie
  • PipPip
  • Group: MrPLC Member
  • Posts: 7
  • Joined: 30-January 07
  • Country:United States
    United States
Thanks Very much to Both of you.
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users