rcastellanos0523

HI...IM TRYING TO COMUNICATE TO A SLC 5/04 USING THE ETHERNET INTERFACE 1761-NET-ENI SERIES B... I HAVE USE BEFORE THIS MODULE WITH MICROLOGIX BUT I CANT GET IT TO WORK WITH THE 5/04...THE CABLE THAT IM USING TO INTERFACE THE 5/04 WITH THE 1761-NET-ENI IS THE 1761-CBL-PM02 ...ANY IDEA WHAT AM I DOING WRONG.....ANY TIPS.... THANKS

DOES ANYBODY HAS A PROGRAM OR AN EXAMPLE ON HOW TO CONTROL TEMPERATURA USING PID LOOP...MY INPUT A THERMOCOUPLE TYPE K AND MY OUTPUT ANALOG 4-20 MA ...PLEASE IF YOU WILL HELP ME WITH THIS.....THANKS

HI... DO YOU HAVE A PROCEDURE TO SAVE THE PROGRAM IN TO THE MEMORY CARD AND ALSO IF I NEED TO SET SOMETHING IN THE CPU SO WHEN THE BATERY GOES BAD OR SOMETHING ELSE HAPPENS IT CAN GO AN LOOK FOR THE PROGRAM OF THE MEMORY CARD....THANKS

HI... IM HAVING A PROBLEM...TRYING TO UPLOAD THE PROGRAM OF A MACHINE....IT HAS A PASWORDAND THE GUY THAT PUT THE PASWORD IS NO LONGER WITH THE COMPANY...HOW CAN I CRACK THE PASWORD SO I CAN MAKE A BACK UP PROGRAM...THANKS

THE PROCESSOR C200H CPU 31

DO ANYBODY NOWS WHAT CABLE OR INTERFACE DO I NEED SO I CAN TALK TO A C200H......

COULD SOMEBODY GIVE ME A PROCEDURE ON HOW CAN I GET TO TALK A MICROLOGIX PLC TRHU ETHERNET WITH A 1761-NET-ENI????? ANY SOFTWARE OR UTILITY THAT I NEED??????

I DID EXACLY WHAT YOURE EXPLAINING.....AND STILL I CANT VIEW THE PLC.... I DID IT IN ANOTHER 5/05 AND IT DOES WORK..... THE WIRD THING HERE IS THAT I CAN PING THE PROCESSOR....AND STILL THE RSLINX DOESNOT SEE IT.....

HOW CAN I VERIFY THE FIRMWARE OF MY PROCESSOR????? SPECIALY A 5/05 THANKS

I ALREADY CHECK ANOTHER PLC...AND I CAN COMUNICATE TO HIM....ONLY THIS ONE IN PARTICULAR....IT DOES RECOGNIZE THEPINING...BUT RSLINX DOESNT SEE IT......ANY IDEAS.....???????????????

I WOULD LIKE TO KNOW HOW CAN I CONFIGURE THE RSLINX TO TALK TO MY 5/05 THRU ETHERNET..... I CAN PING THE PLC WITH THE DOS PROMPT....BUT I CANT SEE THE PLC IN MY RSLINX....I CAN SEE IT THRU THE RS232 PORT.... HELP

HI, IM TRYING TO UPLOAD THE PROGRAM OF A C200H CPU 31 THAT WAS PROGRAM WITH LSS,BUT I WANT TO USE CX PROGRAMMER... BUT I CANT GET IT TO UPLOAD OR GETTED ON LINE.... ANY SUGGESTIONS??? OR A PROCEDURE TO DO THIS..... THANKS

SI YA LO HE ECHO VARIAS VECES....SI ES POSIBLE......NADA MAS ASIGNALE OTRO NODO

HI... IM LOOKING FOR THE HARDWARE KEY FOR THE 505 SOFTSHOP SOFTWARE, I HAVE THE SOFTWARE BUT I DONT HAVE THE KEY....CAN SOMEBODY SELL IT TO ME OR LEASE IT TO ME.....THANKS....... I ONLY NEED IT TO SAVE A PROGRAM AN PRINT IT OUT.... THATS ALL THAKS

THIS IS A MESSAGE FOR MR JAY ANTONY.... SIR SORRY TO DISTURB YOU BUT I CANT GET THE LOCAL DISTRIBUITOR OF OMRON TO GET ME THE "OMRON PLC GUIDE2" AND HOW CAN I GET AN UPGRADE FOR MY SOTWARE I HAVE CX PROGRAMER VER 4.03 THEY TOLD ME THAT VER 5 IS OUT ....HOW CAN I GET THE UPGRADE.....I COULDNT FIND IT IN THE OMRON WEB SITE..... NEED YOUR HELP THANKS