pklok
MrPLC Member-
Content count
44 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout pklok
-
Rank
Sparky
Contact Methods
- ICQ 0
-
Hello, I have connect de omron scu31_v1 and de ebm-papst ec-fan and used a example from myomron.com. but only what i get is a communication error. Can some one help me to let it work. best regards, Patrick It's Fixed !!
-
The pulse is activates infrequently. i wanted to monitor my home gas pulse and i will see the m³/h if the heater is on.
-
Thanks but i know the formula but my problem is how can i measuring the time between 2 pulses on a good way.
-
one pulse is 0,01 m³ it is a gasmeter pulse how can i convert it to m³/h have some one a function blok for it. Patrick
-
i have do it with the DATE(735) but the clock go back to the old value when the date function is of
-
how can i change the plc clock to one hour later in a ladder function thanks patrick
-
i have insert a plc clock componet in cx-supervisor and thats working thanks for your help Execute("INSTELLINGEN_OMRONClockComponent1","Show") like this !!
-
How can i chance the pc time to the plc time in cx-supervisor patrick
-
i now that and i have do that but the problem is when i cut the line the coupler is give a error that's normal but when i connect the coupler and it's going on line he going first in the old state and then the new . the problem is when al io are on an the to the new status and that give a big problem patrick
-
i have a cjm1 cpu12 and a drm21 and i have remote io from beckhoof the bk5200 now i have a problem the problem is when i have outputs on at the remote io and the remote io disconect i put the uot put 0 but when the remote io connect the he gif first a second the old status before he give the new how can i fix it patrick from holland