Sign in to follow this  
Followers 0
pszczepan

NB7W-T01W - web interface

6 posts in this topic

I write macro which set LB9175 to 1. It is set when projects starts. To check if it works I shows bit lamp from LB9175 and it has 1 In NBMaanager I set user and password for WEB interface, but when I tape IP of NB7W in Internet Explorer I have no reply. What am I doing wrong - did I miss something?

Share this post


Link to post
Share on other sites
It sounds like you are doing it correctly. I don't know specifically what Kernel and Rootfs version brought in the Web interface. You may try to upgrade Kernel and Rootfs from NBManager. I am using Kernel version 1764 and Rootfs version 2022 and the Web interface works.

Share this post


Link to post
Share on other sites
Per the manual V106-E1-10 section 8.1, you need NB-Designer 1.30, kernel 1764 or later, and Rootfs 1932 or later.

Share this post


Link to post
Share on other sites
Great Info!

Share this post


Link to post
Share on other sites
I sent new kernel and rootfs and it works - thanks By the way I have question: IT forwarded port 9600 to PLC and now I have remotely access to PLC. Can I have access to panel using port forwarding. One thing is to have possibility to download application remotely, second thing is to have webinterface without VPN just port forwarding. How to setup this?

Share this post


Link to post
Share on other sites
Well web interface uses port 80 by default (all webservers do) and I bet your IT guys won't let that through the firewall, but you can try. I don't know the port used for software connection for programming.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0