Uncletg1

What Red Lion driver is the appropriate driver to use with the Schneider M340 processor? Thank you, Trent

Thank you for the replies to my question, at the moment I am using a GE processor, however, that is subject to change often. My question was more in general, I was hoping there was a single piece of software that could do multiple variations. In hindsight, probably not very do-able due to all the proprietary protocols out there. The Internal tag setting accomplishes what I need at this time. Thanks Again!

Thank you for the reply, PLCSim seems to be what I was looking for. My current need was for a GE RX3i, however, I never thought about converting my tags to "Internal" and using the watch window. This is such a simple task in the .csv that I can't believe I overlooked this for so long! Thank you for the tip, T.

Does anyone know of a program that will emulate a PLC so I can test my Red Lion HMI? If I had the PLC I could emulate the HMI and test buttons and aesthetics, I have just the opposite... An HMI and no PLC. Is there software that will allow me to link with a "Virtual PLC" for testing? Thank you,

Thank you, I will give that a try.

Good Day All, Has anyone had success running any of the Big Boys development\runtime (WW, iFIX etc.) on a Virtual Machine. I have been trying to get iFIX to do this and for some reason it will not open my project, it hangs. I have made a backup and tried restoring and I have tried copying the entire C:\Dynamic over. Host OS - Win 7 64bit VM OS - XP Pro SP3 iFIX 3.5 Customer with old load just crashed and does not want to upgrade (typical), and does not have the time to order a XP box. My first thought was to load iFIX on a XP VM and hit Runtime.... This did not work! Any assistance would be appreciated, T.