gravitar

MrPLC Member
  • Content count

    984
  • Joined

  • Last visited

Community Reputation

3 Neutral

About gravitar

  • Rank
    Slacker

Contact Methods

  • Website URL http://
  • ICQ 0

Profile Information

  • Location Home of last year's American League champions!
  • Country United States

Recent Profile Visitors

4640 profile views
  1. Purpose of set-retentive coils?

    Help me out with this, guys.. I'm familiar with the concept of set/reset coils. It's the same as latch/unlatch in an A-B PLC, it seems. But this whole "M" coil thing.. give me an example that I can grasp of what this would be used for! Especially SM/RM coils.. What is the benefit of adding retentiveness to a set output? This program I'm dealing with is full of SM/SR's.
  2. Transfer my activation

    Yeah.. but.. Haven't we officially come to The End Of The Road, for EVRSI activation? Aren't they finally living up to the threat they've been issuing for the last several years, and the latest versions finally are not recognizing EVRSI?
  3. Extreme Newbie Proficy ME Question

    Does the "+" coil/contact signify more than just allowing a rung to be longer than the width of the display? I had plenty of room on the displayed rung to insert a contact between the timer block and the done bit, but it seemed that proficy would not accept that as a valid sequence of instructions.
  4. Vibration Monitoring

    That is awesome. Make sure it has a green "Calibrated" sticker on the side of the glass :)
  5. Extreme Newbie Proficy ME Question

    Hello! I'm currently working on my first experience with a GE PLC. It is a small automated shear table with a Series 90-30 CPU374 PLC. The program is already written, I'm just trying to make a few small improvements. Here's the first thing I'm trying to figure out.. I hoped that I could put a contact between a timer and its output coil, but Proficy didn't like that. So I'm figuring that I need to add a rung, assign a new bit to the timer done bit, and use this new bit with the condition I want to trigger the bit that's currently the timer done bit. Here's my problem.. I'm looking in the %M table, and it shows me a table of bits from 0-4096. I can see their present state, but I can't figure out how to see a "usage" table. How do I figure out which bits are unused in the program so that I can use one of them?
  6. If reliability is the main consideration, you're right to consider a PLC over a PC-based solution. Here's something else to consider.. Will you be able to program this with your employer's software, or will you have to buy your own? PLC software varies in price from several hundred to several thousand dollars. If you're only planning on making one (or a few) of these devices, you're probably going to want to limit your choices to the PLC families that use the least expensive software, or better yet ones that can be programmed with software you already have access to.
  7. I wonder if a PC running a small VB app driving a discrete I/O module, might be the most cost-effective solution.
  8. WORKMASTER INDUSTRIAL COMPUTER

    Of all the things to call one's self.. poopstain?
  9. Panasonic Toughbooks

    I feel compelled to comment because I'm a toughbook user.. no, make that a toughbook enthusiast. First of all, Panasonic has several product lines that all share the "Toughbook" name. Personally I think that's a bad strategy. The only ones that deserve to be called Toughbooks are their "fully rugged" line.. The CF25, CF27, CF28, CF29, and the current model, the CF30. All the other ones probably have some degree of ruggedness, but probably not what would you would expect. I only deal with the fully rugged ones and have no desire to try any of the others. Ok with that said, everything Paulengr has said is true about the "fully rugged" line. They're comparitively slow, heavy, expensive, and the screens are lousy. If those are your performance metrics, then don't buy a toughbook. They aren't for everyone.. Heck I would go so far as to say that they aren't for ANYONE, other than those very few people that put reliability, impact resistance, weather resistance, and the couple of other features that toughbooks have (touchscreen, backlit keyboard, vehicle mounting, etc) above all else. I'm in that tiny minority. I think they're ideal for field service applications, or anywhere else that you REALLY, REALLY need that slow CPU and lousy screen to keep working, no matter what.
  10. Thanks for the tip! I did somehow convince management to provide me with the latest rev, so that hurdle is crossed. It looks like even with this newer version though, it is trying to find help files from an external server.. Very inconvenient!
  11. Timing Diagram for PLC Programme

    My guess is the background image is there to convince you to buy the product.. If it works well for you and isn't insanely expensive (most shareware isn't), your best bet is probably to buy the full version!
  12. RSview ME & Vista

    Haven't we reached the point where OEMs can't sell new computers with an XP COA on them anymore? It would be pretty silly if A-B couldn't sell an industrial PC capable of running their own software!
  13. Wouldn't it be nice...

    I asked about that when they first came out.. was told that online editing takes a lot of "horsepower" and they couldn't fit it in to the 1500's processor slot.. I'm not sure I believe that though.. My guess is it was a turf war with the SLC 500 team :)
  14. I just got an auction listing for a company that was using "Anthropomorphic" welding robots. I wasn't familiar with that term so I googled it, and I guess it means "possessing human qualities".. Which doesn't really tell me anything :) Applied to the context of robotics, what does this indicate? Just catchy advertising jargon written by someone that doesn't know robotics?
  15. I just spent a good long while this morning trying to do just that. I might be approaching this from the wrong mindset, but I just didn't see how you could walk up to an "unknown" processor and capture the program! Anyone know how to do this? I'm using Cimplicity Machine Edition v. 5.0. Just to add insult to injury, the online help system in this particular installation doesn't work, either. It seems to want to go to the web to find the help files, but I'm having no luck getting it to penetrate the company's firewall, nor can I seem to be able to reconfigure it to use local help files.