RDA

it could be the decimal separator, the tup pc is set dome vigola, while you want it as a point, the red zones are those with the decimal digits.  

Certainly everyone is doing his job

you can not plc need to be slave with the panel you have to put a plc with ethernet port and connect the 2 hmi via switch Regards

  Run the files to a friend who has the software, and at the time of printing it does it on pdf files.

no I'm trying to connect one of the serial Modbus slaves plc simulated using the funcion TXD e RXD.

i tried tested, the serial work as slaves nt link, also function if com cx simulator and mode "display", as "real com" does non work, where i'm wrong. Greeting.

Sorry my language, repeat the question, do you know the simulator cx send the serial pc which is turning the control that are written in the plc and posted on serial such as e txd rxd

FRON TEST DONE THAT I SEE THOW IT WORK THE SIMULATOR AD SLAVES SERIAL AND WORK IF COM CONFIGURED AS SISPLAY

HALLO THER IN SOMEON WHO HAS OPERADEC CX SIMULATOR WITH SERIAL EMULATED COM DE REALLY TURNS ON COM PC DE PC WHERE THE SIMULATOR? THANK YOU

the real time clok rtc two are indipendent

If probleam and software that he expired and maybe did a useless work and money spent. Under all circumstances however, you must have the source code to be downloaded into the new CPU

hello navigators anyone has ever tried with cx simulator to simulate the network with eternet query from another external PC turns to where cx simulator?

TRANSFERT THE #0 IF COMUNICATION ON TROUBLE

do something simpler alternative measures of reading and writing with the system bit %S6 and see if it works in order to understand if the communication parameters are ok, after passing to increase the speed of queries