Posted 16 Dec 2014 I am trying to setup communication between an EIP21 and a AB Compactlogix processor. Setup both units with Network configurator and Logix5000. In Logix5000 I used the Generic Ethernet Module with the correct consumer and producer tags and instances. When I go online Logix can see the EIP and bring up the module information but the connection itself is in Error 16#0114 Electronic keying Error. Unfortunately cannot find a way to disable keying like possible on the Controllogix Ethernet module. Can Anyone help. An application example or some tips how to resolve it would be great. Kind Regards Rolf Share this post Link to post Share on other sites
Posted 21 Dec 2014 Omron to AB EtherNetIP Explicit Messaging: http://forums.mrplc.com/index.php?app=downloads&showfile=934 Not sure if this is what you are looking for but may help to understand better. Regarding the Electronic Keying, you may want to post in the AB forum. I'm sure I've seen this discussion before. Share this post Link to post Share on other sites
Posted 21 Dec 2014 A 16#0114 is a Vendor Code or Product Code Mismatch, per the ODVA specification. Since you don't use an eds file with a Vendor Code or Product Code with the Generic Ethernet module, I suspect there must be a way to disable electronic keying. I know that in some versions of Logix5000 there is a check box to do so. I would check with Rockwell to see how they suggest solving the problem. Share this post Link to post Share on other sites