allan75

https://www.dropbox.com/s/scd7m8getlncdgv/Screenshot1.JPG

Hi. Maybe this picture helps. In PLC IO table Start with Settings Inherited.

Hi, Change MCH472 unit to 1.

Hello, maybe you need something like this: https://www.dropbox.com/s/b0lns8ox82ldizh/Screenshot.JPG I used plot, trend functions in Citect Scada.

Now it works. CJ2M UDP port no. must be 9600. I had UDP port no. 9604. I don´t know how to change on option board CP1W-CIF41 Remote Port No. And I change bit A202.00 to NO. Thanks.

Here is an example. But this doesn´t work. https://www.dropbox.com/s/ubn0j288zria3yv/Recv.cxp

Unit number is set to 0. But I can´t get RECV to work.

Hi everyone, first sorry for my english. I'm working on a project to communicate a CJ2M-CPU31 and CP1E-NA with the option board CP1W-CIF41. My question is, How I can do to share data between PLCs. Thank you very much to all.