sikenga

MrPLC Member
  • Content count

    12
  • Joined

  • Last visited

Community Reputation

0 Neutral

About sikenga

  • Rank
    Sparky
  • Birthday 04/14/82

Contact Methods

  • MSN sikenga@hotmail.com
  • Website URL http://

Profile Information

  • Location Valencia Edo. Carabobo
  • Country Venezuela

Recent Profile Visitors

2519 profile views
  1. SRVO-021 on RJ3 extended axis

    Hello guys. I have a similar problem, I have recently install a new RJ2 CPU and install Handlingtool V420, after that when a power up the controller TP shows a SRVO 075 failure on each axis (my robot is a M410 IWX 4 axis) and quickly change to SRVO 021 failure on each axis too. Then, i have been looking for a Emergency signal (E Stop - Fence - TP Emergency stop - Cabinet Switch) that could be the problem cause, but i didnt found it, i have allready jumped all of the Emergency inputs, but the Servo Drivers just are NOT READY. Trying to identify the problem I press the contactors manually (those that feed the Servo Drive Power Unit), and the driver goes to READY and I move the robot to Master..... and Calibra....but when I release de DM switch in the TeachPendant the problem appears again. Some Idea to solve the problem? The Robot has no program in memory, its there any parameter or value that I have to change to make the interface goes up and feed the Servo Controllers while the CPU have no Programs (starting?) Thanks.
  2. B&R Automation Studio 3.X

    I have an B&R 2005 series and i dont know how can i make an backup, how to go online, under protocol ?
  3. B&R Automation Studio 3.X

    I have an B&R 2005 series and i dont know how can i make an backup, how to go online, under protocol ?
  4. Movement control

    Good morning, i need a procedure to program a displacement registry... I need to program an application of displacement registry in various robots... Regards.
  5. Kettner Robogrip

    Well in our company, have instaled a Kettner Robogrip but it doesnt work, but we havent any information about this robot, somebody have any information about that? Rewards...
  6. Changes Control

    Ok...and them wich one its the better way to manage the changes based in a multi system, multi vendor, multi technology, Enviroment and with the best performance.???
  7. Changes Control

    Thanks for help...
  8. Current GE Ladder Programming Software for 90-30

    If the PLC its running and you want to see the program in it, you have to do it with LM 90, but if you want to reprogram it you can do it with Proficy machine edition.
  9. Changes Control

    Well, i have been reading and the GE option it looks like a good option but i cant see clear wich one its the apropiated, wich one have that i need, we have 13 production cells, and maybe have around 20 PLC's (80 % allen bradley), and some systems more like HEUF Inspectors, danfoss frec. Variators and all of those systems we need to include in the changes management system. Somebody have to worked with those softwares? And can talk me the benefits in the GE and AB Case? Instead i have no enougth information about how can factory talk help us...
  10. Well, we need to find the better way to control the changes in a group of PLC´s (a big group of PLC´s), and we are thinking of install Factory Talk from Allen Bradley but i dont know if this aplication have the option to connect with other systems inclusive with Siemens PLC´s. Who can talk me about the providence of Factory Talk in this case. Rewards.
  11. PG2000 S5 programing

    correct but, i need something more instructive, like tutorials, examples, step bye step. And i need a PROLEIT system manual if you know where can i find it.
  12. PG2000 S5 programing

    Well, i need help about S5 programing on PG2000, i have worked with GE FANUC products and Allen Bradley too but Siemens S5 its look like something diferent, and i need if somebody can give me a tutorial or a parctical document to make projects from the cero point. Rewards.