heidarpour

Hello I used some S5 card that need replacement with new in S5.I divid them two groups ,Exsist cards And in our store: Digital Input cards EXist card= 6ES5 420-4UA11 and 6ES5 420-4UA12 Want to Replace with(In Store):6ES5 420-4UA13 And 6ES5 420-4UA14 Digital Output cards EXist card=6ES5 441-4UA11 and 6ES5 441-4UA12 Want to Replace with(In Store):6ES5 441-4UA13 and 6ES5 441-4UA14 Analog Input cards EXist card= 6ES5 465-4UA11 and 6ES5 465-4UA12and 6ES5 463-4UA12 Want to Replace with(In Store)=6ES5 465-4UA13 Analog Output cards EXist card=6ES5 470-4UC11 and 6ES5 470-4UC12 Want to Replace with(In Store):6ES5 470-4UC13 Please help me and send me data sheet. Thanks

There is zero on HMI.Our HMI is PC677.

At first we download program into internal RAM of CPU928A with IM308C order number 6ES5308-3UC21 and every thing was ok with data exchange to HMI.Then we decieded use and program S5 flash card 6ES5-374-2KG21 with same CPU928A and IM308C and there is same program in internal RAM . in this status CPU and IM308C are ok and run with exchange data on HMI protools.But when only program was into the flash card and CPU was overall reset ,the CPU and IM308C goes to the stop and all data in HMI set to zero.

At first we download program into internal ram of CPU928A with IM308C order number 6ES5308-3UC21 and every thing was ok with data exchange to HMI.Then we decieded use and program S5 flash card 6ES5-374-2KG21 with same CPU928A and IM308C .But in this status CPU and IM308C are ok and run without any data on HMI protools.