seter

Hi everyone!!! i want to know port on CPU PLC2/17 (15 Pin prot) can use PCMK (ser.B) programming or not? Thanks.

Now it OK ,(Use Default Setting in Setting Modbus Device Assignment) the quick start for GXWorks 2 don't have only have gxdeverloper anyone have for gxwork2 ??? so it OK, i used the Kepware EX for read Modbus in QJ1MB91 Module and i can only read can not write in holdding register, i don't know Why ????? PS. i need link for manual this module configuration by gxworks 2!!!!!! Thanks.

The DCS System need to get data in PLC such as status Pump--- status Temp.. and Etc... i will setting PLC Q00 CPU with Qj71MB91 in Slave Mode but this module i never use it before. I want to know ? how to setting when use intelligent function in Software GXworks2

Hello Everyone i will Provide the Q PLC System for DCS get the status in PLC Q00CPU (DCS it Master Modbus ), Now, i use the function of GX works 2 intelligent function by this it first time for me ! everyone can help for how to Setting this module?? Thanks

Thank you Mr.kaare_t

Please see attach file i don't know i used CPU Q13UDEH but i wii creat Timer T70 to Txx Upper can't use anyone can help me??? Thanks.

how to get the latest version ?? (the internet no have ) Thanks.

Thank you , You can see my VDO at below

Now , Create already with labels but has message "No Libraries Install Please install MELSOFT Library" when select install in library

you already setting IP Address on 1756-EMBT or not? the first Step for install 1756-ENBT Step 1 use Lan (Cross Cable) put into you 1756-ENBT with you Laptop Step 2 use software BooTP for Configuration IP Address via MC Address (Start>All Program>Rockwell Software) (find usermanual BooTP for more Information) Step 3 When Finish ! Use the RSlink Software select TCP/TP Driver for check who active Step 4 Right Click on 1756-ENBT and change From dynamic IP to Static IP Step 5 Trun off Power Controllogix System Step 6 Ethernet Module Keep IP Address !!

Thanks you. everybody ,Now it's ok

i Can't do it !! please see my Clip VDO Thanks. No Library Install.rar

i want to know , how to install Library because i will use the FB function Import. Thanks.

simple ladder i used (Q06UDEH CPU) with GX Works 2 version 1.55H Thanks.

Hi i want to know ,how to create subroutine on gx work 2 now is no execution type thanks.