Sign in to follow this  
Followers 0
fspt_tech

Software Loading Problem on R-J Controller

2 posts in this topic

I posted this topic on the General Lounge and forgot there was a section for robots. It should've gone here. Anyway, please help!!! This is related to Fanuc Robots. I can really use some help with this problem: I have a Fanuc Arcmate 100 running on an R-J controller. I had the main CPU go out on me. It was replaced and now I have to reload the system software. I'm using KFLOPPY on my PC. I got some great help on this forum on how to transfer the data from the individual floppy disks to the controller using KFLOPPY (Thanks!). I'm having a problem with one of the disks (at least I believe it's a problem). After being prompted to insert the LIBRARY1 disk on the teach pendant, I do so, and then attempt to transfer the data from that disk. But it just stalls at that point. I get a message that doesn't look good to me. My Teach Pendant screen looks like this: _____________________ Opening P3:/AWSEUPEG.TX. Opening P3:/AWSFMNWNEG.TX. Opening P3:/AWSCHDEG.TX. Opening P3:/AWWV.AS. Opening P3:/AWWV.AS. INTP related sysv (initial) Loading from LIBRARY1. _____________________ What does "INTP related sysv (initial)" mean? After scrolling through many "Opening P3:/XXXX" lines, I get this message when I come to this disk. I've tried reloading from scratch several times but everytime I get to this disk, I have this same message appear. And it just stalls. Or is it stalling? Is there something still loading at this point and I'm just being too impatient? Could I possibly have a corrupt file on the disk? Any help or suggestions would be greatly appreciated!

Share this post


Link to post
Share on other sites

Hello, I had an RJ controller go down on me and am now trying to reload the software on it using a Windows XP computer with a USB to serial 9 pin adapter and KFloppy. We had to buy the software from Fanuc and it came via email so we don't have actual floppy disk or a floppy drive; however, I am getting the same problem you are as the teach pendent gets to loading LIBRARY1 and stops. We left it running for 5 hours just to make sure it had the time to load and it never did. If you could help out and tell me if you found the answer to your problem and, if so, tell me what the solution was, as it is nearly the same problem, thank you.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0