JeffKiper

MrPLC Member
  • Content count

    448
  • Joined

  • Last visited

Community Reputation

9 Neutral

About JeffKiper

  • Rank
    Sparky
  • Birthday 03/25/80

Contact Methods

  • Website URL http://
  • ICQ 0

Profile Information

  • Location Southern IN
  • Country United States
  • Interests Family

Recent Profile Visitors

6693 profile views
  1. Rockwell did some upgrades and the older Memory clear methods doesnt work. You know have to do a ControlFlash to wipe the Memory.
  2. I second Bob. Look up Tim's youtube channel. He has some great videos about panels  and UL508A.    His heart is coming from a teacher trying to spread the knowledge. 
  3. You can run Crimson 3.0 emulator and do all the testung you need if you have the PLC already. It wont work over you laptop wifi it will require a hardwired connection. Ask me how I learned that little problem......   I do a bunch of testing with the emulator in 3.0 i just change the hardware to a 308A and start playing.
  4. Bob I'm 90% sure you can do the hope. Off of memory when you the PLC comms up there is s path tab that allows you to do specify the path. I remember doing ut like an old school MSG path where 1,2,192.168.1.9,1,5,2,44. I dont remember the exact call out for the paths. 
  5. I like the 5000 HMI for basic systems. Early on they had some limitations, now they are my goto for HMI.
  6. If you are looking for someone to do this let me know. I worked on the exact saws Bob is talking about. We used old school PLC back in the day. Now we would use ethernet devices and run. 
  7. i need help for chaina plc

    The MAM-KY02S  is a dedicated processor just for Air Compressors correct?
  8. DeviceNET Master Simulator

    Chris look at Real Time Automation the have some nice hardware based systems. The 460 can be used as a Dnet master. Not a simulator but cost effective.
  9. Whole Forum Posts are Replaced???

    No they where all old post. Thanks
  10. Whole Forum Posts are Replaced???

    If this has been covered sorry I couldn't find it in my search? Why have some of the pictures be deleted in several of the threads?
  11. Getting freelance PLC programming work

    Get insurance!!!! One small problem and it could cost you a lot.
  12. Multiple EtherTraks to 1 Red Lion

    Are you trying to use them on the serial or Ethernet? I have not used them. So take this advice for what you paid for it. You should be able to use the Modbus driver to talk to the EtherTraks.
  13. inexspensive interface

    Red Lion HMI
  14. Host commands is what you will be looking for in the manual.
  15. DIN Rail Cutters

    I bought DIN rail and wire duct cutters when I was doing a huge job. Money well spent. I can layout duct and rail super quick. My helpers started out using hacksaws. The edges always looked like they where cut with a hacksaw and someone tried to clean them up. My local supply house has a DIN cutter and I used it a handfull of times. I was in another panel shop and they where cutting rail like mad men.