Connecting Expansion With CPU

[Ashik Ulfath 0]

Someone Please help me how to connect the Expansion Unit to Omron Micro Plc... Im using CP1W expansion slot with CP1E Micro Plc. Explain me the procedure to be done in CX programmer and IO addressing of that Expansion Unit in CX programmer... Thanks

[Mendon Systems 22]

Not enough information to answer your question! Connecting a CP1W-what? to a CP1E-what? It makes a difference in the results! Read section 8 of the W479 manual.

[Ashik Ulfath 0]

Oh Sorry Im using CP1E-N30DR with CP1W-8ER! I tried connecting the Expansion Module to the CPU module. But when i tried to Continue the Output address in CX programmer it is Not Working... Lets say the CPU module has outputs till Q101.03 and when i tried using the Expansion Module starting from Q101.04 it is not working.. And kindly Guide me the steps to be done in CX programmer to connect an Expansion Module and the addressing of outputs cuz its a Digital Output Expansion Module...

[pfort 20]

There is nothing that you need to do in CXP. Your output adresses are 102.00 to 102.07 for this expansion on a 30 IO CP series PLC. I often wonder why the first reflex is asking a question on a forum and wait for the response, instead of reading the manuals.... Edited 19 Feb 2014 by pfort

[Ashik Ulfath 0]

Hey thank you.. I got confused cuz, when we type the output address in the CPU module the letter "Q" will be added infront automatically.. But when we try to enter the output address for Expansion modules the "q" will not appear. So i thought its the Wrong addressing.. But when i tried to Force the Outputs the respective Outputs are ON.