-
Content count
278 -
Joined
-
Last visited
-
funfunfun. started following dmargineau
-
Good morning! I am wondering if you have ever had to exchange data between a Micro 850 and an L18? I am having problems getting them to talk using the MSG. Do you have any info on these CIP modules? and how to configure them?
-
It is an issue caused by the using of the same tag (name-> memory location) within more than one ACTION or TRANSITION. Refer to https://rockwellautomation.custhelp.com/app/answers/detail/a_id/45745 The reason is probably related to the RSL5K FBD editor Order of Execution Rules; if "duplicate" names are encountered, the processor will not be able to "decide" which one of them should be executed first hence not being able to "resolve the logic loop". If you have a TechConnect contract, refer to https://rockwellautomation.custhelp.com/app/answers/detail/a_id/50324/related/1
-
micrologix Analogue programming
dmargineau replied to WARRI's topic in Allen Bradley / Rockwell Automation
http://en.wikipedia.org/wiki/Voltage_divider http://en.wikipedia.org/wiki/Potentiometer -
Welcome to the Forum! Within your FTVS application, right-click on an empty area of the respective Display and choose Display Properties...; choose the Size (in pixels),give it a Number and decide which way it's going to show up (Replacing or On-Top of the previous display); move over to the Display Properties interface Behavior Tab and you will find the "placeholders" for the display's Startup and Shutdown macros. Within the Project Tree Logic and Control folder, create two macros containing the tags and relating expressions required for the Startup and Shutdown of the newly configured display and then, point the Display Properties/Behavior configurator to the configured macros. Don't forget to add Display Navigation buttons and to Save when done.
-
Allen Bradley Industrial computer issue
dmargineau replied to RockwellSA's topic in Allen Bradley / Rockwell Automation
Use the Configuration Mode/Application Settings -File Menu (Copy Applications) from Internal Storage to External Storage (present USB media). The only way you could create a different revision Runtime (matching the FTV Machine Edition Station running on the Machine revision!) is by using the FactoryTalk View Studo ME software. -
Allen Bradley Industrial computer issue
dmargineau replied to RockwellSA's topic in Allen Bradley / Rockwell Automation
Is it a local application or it is distributed? If it is local, you will need FactoryTalk View Machine Edition Station. You could transfer the Runtime application via USB media, however, the existing Runtime application might not be compatible with the newer terminal firmware. if you want to retrieve and eventually Restore/Archive/Backup the application file you will need FactoryTalk View Studio ME. http://www.rockwellautomation.com/rockwellsoftware/performance/view/orderinginfo.html If it is a distributed application, your customer's FactoryTalk View SE system is "serving" the application file hence there is no need for a "terminal" backup. -
Downgrading Firmware for 1769-L32E
dmargineau replied to GT6Steve's topic in Allen Bradley / Rockwell Automation
The bad news is that you will need RSLogix 5000 Rev.19 to connect to the CPU.... The good ones: once connected to the CPU using RSL5K Rev.19.xy, you should be able to "downgrade" the controller firmware to Rev.17 using the ControlFlash utility and the Firmware package included with RSL5K Rev.17. Install RSL5K Rev.19.xy concurrently to Rev.17; on Logix Class platforms, user software major revisions must match the controller major firmware revisions. -
not able to dowload to compact logix & control logix
dmargineau replied to podadurr's topic in Allen Bradley / Rockwell Automation
It is an .EDS (Electronic Data Sheet) issue. Probably your copy of RSLinx is older than the CPU's "age". You could freely download RSLinx Lite (I'd suggest at least Rev. 2.59 for a 32-bit OS or Rev. 3.60 for a 64-bit one) at http://compatibility.rockwellautomation.com/Pages/MultiProductDownload.aspx?Keyword=Free&crumb=112 -
(Question) software compatibility with 64-bit pc's
dmargineau replied to chantecler's topic in Allen Bradley / Rockwell Automation
Your best bet if intending to have all the listed software running within one "machine" is Virtual; VMware Workstation is the recommended platform. I'd suggest WinXP Pro SP3 32-bit as the Guest OS, mainly because the older RSL5K revisions. In order to run Rockwell Automation software on a 64-bit OS you will have to install and run only the latest available revisions (if available for 64-bit OSs!). Refer to: https://rockwellautomation.custhelp.com/app/answers/detail/a_id/42682/related/1 -
FAULT with Micrologix 1000
dmargineau replied to jglass's topic in Allen Bradley / Rockwell Automation
Please post your application...someone will need to take a look at it...you might not have the proper CPU type or you are using software not compatible with the controller at hand. -
FactoryTalk Administration Console
dmargineau replied to Kiro's topic in General Topics - The Lounge
Have you tried to delete the Harmony files? https://rockwellautomation.custhelp.com/app/answers/detail/a_id/48241 -
Micro 830 communication by ASCII protocol with bar code reader
dmargineau replied to Pembuk's topic in Allen Bradley / Rockwell Automation
You will find a couple of examples at http://search.rockwellautomation.com/search?q=Micro800+ASCII&filter=0&num=20&getfields=*&btnG=Search&client=samplecode&output=xml_no_dtd&proxystylesheet=samplecode&ulang=en&sort=date%3AD%3AL%3Ad1&entqrm=2&oe=UTF-8&ie=UTF-8&ud=1&exclude_apps=1&site=sample_code -
Get yourself a 1203-USB ($380.00 List) USB-to-DPI/DSI/SCANport Converter; it comes with a cable kit and will allow you to connect to the PF40 DSI communications port. http://literature.rockwellautomation.com/idc/groups/literature/documents/um/drives-um001_-en-p.pdf
-
Modifying the IP Address of any device while "connected" to it via the very protocol which's settings you are editing is never a good idea. Forget BOOTP if the 22-COMM-E had a configured static IP Address; most likely it has been disabled at the time of the original configuration. What drive are we talking about? You will need to connect to the drive via different communications means (DriveExplorer/Executive or CCW via DF1 USB-to-DSI) and modify the comms module settings or, if there is an installed HIM module, use this peripheral device to enter the proper 22-COMM-E module settings. http://literature.rockwellautomation.com/idc/groups/literature/documents/um/drives-um001_-en-p.pdf or Chapter 3 of http://literature.rockwellautomation.com/idc/groups/literature/documents/um/22comm-um004_-en-p.pdf
-
Encoder for use with 1769-HSC
dmargineau replied to EanChaote's topic in Allen Bradley / Rockwell Automation
I'd use a differential encoder (digital) in order to avoid "electrical" issues. Dynapar HA25 or HR25 series http://www.dynapar.com/Products_and_Solutions/Series_HA25_Shafted_Encoder/ Allen-Bradley 845H Series http://ab.rockwellautomation.com/Motion-Control/High-Performance-Incremental-Optical-Encoder#/tab5 This is your HSC module's User Manual: http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1769-in030_-en-p.pdf