MrPLC Allen Bradley http://forums.mrplc.com/index.php Fri, 20 Nov 2009 18:44:38 -0500 15 http://www.mrplc.com/logo.gif http://forums.mrplc.com/index.php http://forums.mrplc.com/index.php?showtopic=18652 We have a machine with a SLC 5 plc, the machine is down with CPU Fault light flashing. I can turn on the motor and see input LED lights indicating buttons pressed. But the machine will not cycle, the last time this occurred a local tech reset the CPU. Is there a way that I can do this? As the tech we had used is no longer around.

Thanks]]> Thu, 19 Nov 2009 13:23:00 -0500 http://forums.mrplc.com/index.php?showtopic=18652 http://forums.mrplc.com/index.php?showtopic=18651
I have a 1761-NET-ENI Ser.B FRN 2.31.

RSLinx version installed: RSLinx Gateway version: 2.42

Rockwell publication : 1761-UM006E-EN-P august 2005.

Cables: 1761-PM02 and Ethernet cable (don't know how you say in English but the one with wires crossed).

Problem: Device not recognized.

I'm familiar with creating drivers through the Configure driver pop up screen. My version of RSLinx doesn't provide the second example of pop up seen on the page 3-6. I don't have the "Find device" button.

On page 3-7 there is a tip for the latest ENI. The link provided doesn't work.

There must be a connection between the PC and the ENI because the icon for the ethernet has no X on it when both are connected.

Is this an issue where you need a tech connect to obtain help?

thank you again.]]> Thu, 19 Nov 2009 11:27:44 -0500 http://forums.mrplc.com/index.php?showtopic=18651 http://forums.mrplc.com/index.php?showtopic=18649 ]]> Wed, 18 Nov 2009 22:35:19 -0500 http://forums.mrplc.com/index.php?showtopic=18649 http://forums.mrplc.com/index.php?showtopic=18648
- Lost as the Bills-]]> Wed, 18 Nov 2009 14:36:11 -0500 http://forums.mrplc.com/index.php?showtopic=18648 http://forums.mrplc.com/index.php?showtopic=18645 How to configure the connection to 1769-IQ16F? It is fast enough to read the actual machine position? How to zero the encoder?
Thank you for any suggestion or ideas.
Patty
]]> Wed, 18 Nov 2009 06:50:16 -0500 http://forums.mrplc.com/index.php?showtopic=18645