Posted 5 Sep 2006 I am wiring up a M23 19pos connector and was wondering is there any industry standard to what each colored wire corresponds to or does it just depend on how your m23 connector is wired? I have a Turck 19-19-5 cable and a phoenix m23 connector with 8 double occupied slots. Share this post Link to post Share on other sites
Posted 22 Nov 2011 Although this is an older post, I just came across it and thought I'd post the answer for anyone with a similar inquiry: Slot/position = pin = conductor color 1 / 4 (A) = 15 = WH 1 / 2 (B) = 7 = GY/PK 2 / 4 (A) = 5 = GN 2 / 2 (B) = 4 = RD/BU 3 / 4 (A) = 16 = YE 3 / 2 (B) = 8 = WH/GN 4 / 4 (A) = 3 = GY 4 / 2 (B) = 14 = BN/GN 5 / 4 (A) = 17 = PK 5 / 2 (B) = 9 = WH/YE 6 / 4 (A) = 2 = RD 6 / 2 (B) = 13 = YE/BN 7 / 4 (A) = 11 = BK 7 / 2 (B) = 10 = WH/GY 8 / 4 (A) = 1 = VT 8 / 2 (B) = 18 = GY/BN 1-8 / 1 (+ 120 V) = 19 = BN 1-8 / 3 (0 V) = 6 = BU 1-8 / 5 (PE) = 12 = GN/YE This may not be the industry standard, but this is what Phoenix Contact uses. Share this post Link to post Share on other sites