CPM2A-PC Cable

[Guest Andre]

Hello, I'm new in OMRON and i would like to make a cable to connect my PC to a CMP2A PLC . Thanks for any help. andre_quinta@hotmail.com

[Guest alf]

You will need a unit called CIFO, the PLC connects to the CIFO, and from the CIFO to the PC use a cable RS232.

[Guest Guest]

Op's :*-( The CPM2A have 2 ports, a peripheral port and a RS232 port. I think that the interfece unit is need only with the peripheral port. Anyway i need to make the cable between the interface unit and the PC.

[BobB 58]

Please join the forum. Here is a link to Omron cables. Omron Cables

[Jay Anthony 118]

OK. To be perfectly honest, yes, BobB's link does define what the part number of the cable should be, but...... It doesn't define the pinout. Try this document link: Cable Pin-Outs & Configuration for Omron's Pre-Terminated Communication Cables - 1Mb .DOC file

[Guest Guest]

Thanks Jay, i will make the cable