22-comm-e language

[JasonEB 0]

My question is regarding a 22-comm-e. I am using CCW version 10. I had to install a new PF40 and E-comm card. When looking at the comm card all the parameters are in German. I can't seem to find a language parameter. The drive parameters are in english. I also tried a HIM and both drive and comm are in english. I have never ran into this before. Looking through the manual of both the card and CCW I can't find anything on the subject of language setting.  At this point I can only assume the problem is in CCW, but I have tried several other cards using CCW just to see what they would display and they are all in english. 

[JasonEB 0]

A friend of mine found this for me. It does work in case anyone else might run into this someday.

 

ID: QA15087 | Access Levels: Everyone

DriveExecutive/22-COMM-E: Displaying in German language

Document ID QA15087

Published Date 03/04/2020

Summary

DriveExecutive/22-COMM-E: Displaying in German language

Question

Why is my 22-COMM-E adapter coming up in German language in DriveExecutive ?

Why is my 22-Comm-E adapter parameters coming up in German language in Connected Components Workbench (CCW)?

Environment

• 22-COMM-E

• DriveExecutive

• Connected Components Workbench (CCW)

 

Answer

Your drive database got corrupted. While DriveExecutive opens with blank screen, re-create the database:

1.     On the Toolbar, click Drive

2.     Select Create Database... an RSWho window will pop up.

3.     Select your drive, and click OK.

4.     After the database has been created, then connect to your drive again.

In CCW go to the Properties tab for the module and in the upper right hand corner click the "Create Database" icon.