C24-R2 to PC Comm port

[DJSauce 0]

Hi all, I have seen 2 pinouts for the serial cable needed.....which is the correct one... Both pinouts are "null modem" configurations with 2/3 pins crossed and 4/6 pins as well. Pin 5 always goes to 5. However then it starts to differ...I see pin one connected to pins 7 and 8 (jumpered) and vice versa. and I also see pin s 7/8 crossed with pin one going to pin 6. Help!

[calvin 0]

Hi Yesterday I post the pinout of the cable that I use for R2 to PC. Maybe that isn't the best pinout, but it works. link to post

[DJSauce 0]

thanks!

[panic mode 246]

I used to do something like that with QC24 a while ago. maybe this link helps a bit http://forums.mrplc.com/index.php?act=ST&f=15&t=518