Posted 3 Jan 2020 Does anyone know where from Mitsubishi pages I can download RJ71PN92 profile. I updated GxWorks3 to version 60 from version 57, but something went wrong and I was forced to use Mitsubishi Clean Tool and probably then the profile information vanished. I can't open anymore my GxWork3 project. Share this post Link to post Share on other sites
Posted 3 Jan 2020 Problem solved by reading MELSEC iQ-R Profinet IO Controller manual: "Profile of the RJ71PN92 are automatically registered in GX Works3 during the installation of GX Configurator-PN " If you see attached window when you try to open your project, install first GX Configurator-PN. And read manuals :) Share this post Link to post Share on other sites
Posted 4 Jan 2020 9 hours ago, Eccu said: Problem solved by reading MELSEC iQ-R Profinet IO Controller manual: "Profile of the RJ71PN92 are automatically registered in GX Works3 during the installation of GX Configurator-PN " If you see attached window when you try to open your project, install first GX Configurator-PN. And read manuals :) Hi , Thanks for Updating the Solved method in this Forum.It will be useful to all. Share this post Link to post Share on other sites