Hmi screen for controllogix

[dakotap 4]

We have a enclosure we want to add a hmi screen to just to see some important things in that area of the water treatment plant ( specifically the filter gallery) . What options are out there that integrates easily with studio 5000/controllogix platform and are robust. Something around a 10” screen . Thanks 

[NevergoldMel 38]

Maple systems

 

[mad4x4 0]

I would go with an Exor 710   or the   JSmart710   or Beijer Exterme  if you need full IP rating

[NevergoldMel 38]

Maple systems has IP and NEMA ratings

 

[Joe E. 259]

We've used Red Lion Kadet and G3, TCP/Proface/QuickPanel, Siemens MPxxx/Comfort, Panelview Standard and Plus HMIs. Of them all, the ones we've had to replace the least were the PanelView Pluses. The ones we've replaced the most are the Siemens MP277s. The TCP/Proface/QuickPanels and PV Standards are ancient, so it's probably not fair to compare them to the others. We have had some weird failures and glitches with the Red Lion G3s. I would rather program a Red Lion G3 over a PV+, but their prices are closer together than when we started using them, so they're harder to justify based on the glitches.

[jaden 2]

Automation Direct's EA9 C-More interfaces very easily to RS5000.  Reasonable priced and great tech support.