Posted 31 Oct 2019 Hi, Friends any one have FX5u cclink ms with ifm io link project .. sample backup and setting please share with me. Share this post Link to post Share on other sites
Posted 31 Oct 2019 CC-Link is easy you just need to know what kind of station it is and how many stations it occupies. Share this post Link to post Share on other sites
Posted 31 Oct 2019 Fx5u link with io link ifm model 8 outputs need to on /off Share this post Link to post Share on other sites
Posted 31 Oct 2019 Not to confuse the issue, but.. You stated originally that you have a FX5u with CCLink and plan to attach an ifmEfector IO Link device for 8 outputs. Please understand that CC Link is not IO Link. Meaning you will need a protocol converter. Normally this is done by using an IO Link Master block with the specific protocol you are trying to communicate with on the PLC. A quick look at ifmEfector's various Master blocks, they have nothing that talks CC Link. Rather they have many varietyies that talk AS-I, EtherNet/IP, EtherCAT, Profinet, etc... Probably need to have a conversation with your ifmEfector rep to get a better understanding. 1 person likes this Share this post Link to post Share on other sites
Posted 4 Nov 2019 Fx5u link with io link ifm model 8 outputs need to on /off Bellow items we are using Sorry for bad English Share this post Link to post Share on other sites
Posted 4 Nov 2019 (edited) The IO Link Master you selected, AL1342, is a Modbus TCP Interface. Can your FX5U PLC talk Modbus TCP? I see no issues with CC-Link module talking to the SMC if SS5Y3-10SVAN-16BS-C4 is CC-Link. If the SMC valve bank truly has a CC-Link version of EX600, you are better off adding a couple of 4 point output modules to the SMC valve bank. Just make sure the loads you are driving are within the capability of the SMC Output modules. Edited 4 Nov 2019 by pcmccartney1 Share this post Link to post Share on other sites