Posted 19 Sep 2019 Anyone have experience with the Peak to Peak hold function on Keyence IL-1000 amplifier? I have an IL-030 lase head running off it and I want to utilize the peak to peak hold function. I connected the red wire from a generic 24VDC, 1A, power supply to the IL-1000 Pink/Purple (timing input wire) and the black wire from the power supply to IL-1000 Blue (0V). I have a 24VDC, 5A, power supply connected to IL-1000 Brown (10-30V) and IL-1000 Blue (0V) to power the IL-1000. What I thought might work is to plug the 24VDC, 1A power supply in and out of an outlet to trigger the timing input for the P-P hold (similar to an on/off button). But it's not doing anything. I am not an electrical guy. Any tips here? Thanks, Share this post Link to post Share on other sites
Posted 19 Sep 2019 Brown to +24VDC Blue to 0V (-24VDC) Pink/Purple will be switched for your sample timing. Switch to 0V if the amplifier is NPN or switch to +24VDC if the amplifier is PNP. Do you know witch (NPN or PNP)? If not post the complete part number of the unit. Share this post Link to post Share on other sites