Posted 11 Sep 2019 hello every body. I want to upload program from HMIGXU3500 . I have Vijeo Designer Basic v1.0 software Is it possible to upload program from this HMI.? I want to have back up file Share this post Link to post Share on other sites
Posted 11 Sep 2019 (edited) I think it's possible, like this faq I found at https://www.schneider-electric.com/en/faqs/FA303227/ and u can use USB type mini B to download or upload the program. Edited 11 Sep 2019 by diraemon Share this post Link to post Share on other sites
Posted 11 Sep 2019 YES. I have this software. I connect mini USB between PC and HMI. Driver is OK in device manager. But I have this error when I want to upload program from HMI . What should I do? Share this post Link to post Share on other sites
Posted 11 Sep 2019 this is about USB driver in device manager. Share this post Link to post Share on other sites
Posted 11 Sep 2019 The HMI runtime must be Downloaded with the Upload allowed bit set on or you cannot recover the project from the HMI. Share this post Link to post Share on other sites
Posted 13 Sep 2019 On 9/11/2019 at 2:18 PM, akbar_torkashwand said: YES. I have this software. I connect mini USB between PC and HMI. Driver is OK in device manager. But I have this error when I want to upload program from HMI . What should I do? This is not the vijeo designer software. This is data manager which is used to upload or download logged data. As mentioned before if the include editor project was not selected when the program was downloaded then the program cannot be uploaded Share this post Link to post Share on other sites
Posted 11 Jan 2020 just try to uupload program with LAN cable and setting it in ip4 configuration Share this post Link to post Share on other sites
Posted 23 Mar 2020 Upload from HMI is only possible if you have selected the Include Editor Project check box and selected the Data file to Secondary Drive (CF Card) or Optional Drive (USB stick) prior to download the application into HMI.If the above has not been done it will not be possible to upload the application from HMI.For more information please see the video from below link :https://schneider-electric.app.box.com/s/0i8ea3p1hfubp74q1p4m Share this post Link to post Share on other sites