Powerflex 700S drives fault on F59 Net Loss DPI P5

[jrsiscool 0]

I have an issues with various Powerflex 700S drives tripping out periodically on Net Loss DPI P5 fault (F# 59).

These drives are set up on the same ControlNet network to communicate with the Contrologix 5563 processor.

The drives will reset easily and the process restarted, but it is a nuisance and time is lost resetting the equipment.

Any advice will be appreciated.

[Izzybe 13]

This means PORT 5 on the VFD is not setup right.  It means something in your RSLOGIX5000 file (under your IO tree is not setup right) or the powerflex700 adapter (I assume you are using a 20-COMM-E card) is not set correctly. 

In RSLOGIX5000 - under the VFD device configuration - for keying are you using compatible module? is connection showing datalinks and dataformat 0 datalinks? is your VFD AOP correctly installed on your laptop?