Connect the PLC FX5U and camera vision PIM60 SICK using TPC/IP

[Tom1988 0]

Dear all,

I have project. I need Connect the PLC FX5U and camera vision PIM60 SICK using TPC/IP.

So,I have never done TCP connection ever. Do you have any sample programs. 

Can you help me.

Thanks all.

[Gambit 324]

Does the PIM60 Sick support MC - SLMP or modbus ?

[Tom1988 0]

Thanks for answer. PIM60 Sick support ethernet TCP/IP. I connect communication modbus. 

This is manual PIM60 Sick  https://cdn.sick.com/media/docs/7/37/837/User_manual_Inspector_PIM60_ver_2.0_en_IM0048837.PDF .

 

[Gambit 324]

Looks like the camera only supports ethernet raw(json strings) or ethernet/IP. 
So your options are:

• Add an Ethernet/IP module to your FX5U config.
• Create the Raw data protocol needed in de FX5 using pre defined protocol support.
• Use a camera which supports the mitsubishi SLMP protocol like cognex - keyence etc