Matthew2019

Omron PLC's with Syswin3.4

10 posts in this topic

Hello, i am learning PLC programming with OMRON syswin 3.4 and before purchase cables i need to know if that works with Omron  CQM1 CPU45-V1

i read in manuals that i will be able but when i made new project in Syswin i can't see CQM1 in drop menu. 

thanks in advance

Edited by Matthew2019

Share this post


Link to post
Share on other sites

I don't think i have same version as you have, see attached screen shot

 

 

Syswin.png

Share this post


Link to post
Share on other sites

You have the CPM1 version.

Without a serial number to activate the software, it goes into CPM1 mode.

Hope this helps.

gtsuport

Share this post


Link to post
Share on other sites

You may have a lite version (demo) you may need to talk to an omron rep to get a full version or a version of cx one

 

Share this post


Link to post
Share on other sites

Thanks for the answers, i already contact local Omron rep asking for help. 

I can get  one Omron CPM1A cpu with a peripheral cable,  i found the following adapter on internet for 40 euro.

OMRON CPM1 - CIF01 RS-232C ADAPTER INTERFACE UNIT

thanks 

Edited by Matthew2019

Share this post


Link to post
Share on other sites

What is the part number of the peripheral cable?

Omron USB to RS232 adapter is part number CS1W-CIF31, expensive but it works.

Alternate that I have had good luck with is Keyspan USA-19HS.  You should be able to get this from Amazon or Ebay.

Share this post


Link to post
Share on other sites

Just checked Ebay, they have a lot of CPM1A units.

You can purchase a usb cable for the CPM1A from here:

Cable

May not be the cheapest cable, but I know this one works.  Chinese cables sometimes do not.

gtsuport

Share this post


Link to post
Share on other sites
19 hours ago, gtsuport said:

What is the part number of the peripheral cable?

Omron USB to RS232 adapter is part number CS1W-CIF31, expensive but it works.

Alternate that I have had good luck with is Keyspan USA-19HS.  You should be able to get this from Amazon or Ebay.

Mention on the cabel sticker Omron C200H-CN222, come together with PR027 programming console. 

Share this post


Link to post
Share on other sites

C200H-CN222 will only work with the PRO27 programming console.

The CPM1-CIF01 works with Omron Cable C200HS-CN220-EU.

gtsuport

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now