Posted 2 Feb 2005 Hi All, I have my mitsubishi FX 1N sending text messages through my maestro gsm modem, when a given input is pulsed.( eventually it will be when an error is flaged). I use AT commands for the modem to use the "phone number" and "message to be sent", and they are stored as ansi II strings in the PLC. Now I'm just wondering how i would send an email. I know it will be practically the same way, but im guessing that there should be an extra AT command for the email address aswell as the phone number. I was in contact with my modile service provider and the gave me a phone number for their sms to email gateway. Hopefully someone can help me with this. Thanks very much. Share this post Link to post Share on other sites